This menu is used for the
SCAN field of all record types.
The set of periodic scan rates may be modified for an individual IOC by copying the menuScan.dbd file from Base into the IOC's source directory and changing it to contain the desired scan rates.
The scan periods are extracted from the choice strings at runtime, which must be expressed as a number with any of the following units appended:
second seconds minute minutes hour hours Hertz Hz
At IOC start-up a separate scan thread will be created for each period, with thread priority increasing further down the list, so faster periods should appear after slower ones.
Scan rates that cannot be achieved will generate a warning message from the
Index Identifier Choice String 0 menuScanPassive Passive 1 menuScanEvent Event 2 menuScanI_O_Intr I/O Intr 3 menuScan10_second 10 second 4 menuScan5_second 5 second 5 menuScan2_second 2 second 6 menuScan1_second 1 second 7 menuScan_5_second .5 second 8 menuScan_2_second .2 second 9 menuScan_1_second .1 second