Next: Extended BSP routines
Up: Infrastructure - Tools and
Previous: Get, build and install
Contents
The RTEMS build process creates some sample applications. If you're just getting started with RTEMS it's probably
a good idea to verify that you can actually run a simple RTEMS application on your target hardware before trying to
run a full-blown EPICS IOC application.
The actual method of loading an application into a target processor is
hardware-dependent. Section 4.1.3 describes a method which
may be used with RTEMS mvme2100 targets.
Eric Norum
[email protected]
Mon Oct 19 11:30:39 CDT 2009