Changed:
The following changes
were made to files:
1) devScaler.c, devScaler_VS.c – changed to new interface between scaler
record and device support.
2) Db/Jscaler* – deleted, these are obsolete and stdApp/Db/scaler* should be
used instead.
Changed:
The following changes
were made to files:
1) Acromag_16IO.db – card number is now a macro.
2) devScaler.c – removed debug macro definitions with a
variable number of arguments
3) devScaler_VS.c – removed debug macro definitions with a
variable number of arguments
4) vmeRecord.c – removed debug macro definitions with a
variable number of arguments
Changed:
The following changes
were made to files:
1) getFilledBuckets.st – To allow
multiple instances.
2) vmeVXSupport.db – Included
vmsSupport.dbd.
3) Acro_bi_scan.adl – Added “9440”
to PV names,
4) BunchClkGen.db – To allow multiple
instances.
The following changes
were made to the Heidenhain IK320 device driver.
1) Elminated the
need to call drvIK320RegErrStr() from the vxWorks st.cmd file.
2)
taskDelay(1)'s and semTake(**, 1)'s with delay of 1 tick changed to
5ms.
3) Allow reading encoder without referencing.
Changed:
The devAvme9440 module is OS independent.
Tested using base 3.14.6 and 3.14.7, seq 2.0.8, calc 2.3, sscan 2.3, std 2.3, and asyn 1.2.
New support:
MRD-100:
1) devAvmeMRD –
Provides new device support and is the first step in moving away
from using devA32Vme.
2) msl_mrd100.db – Modified to
reflect new device support module.
3) msl_mrd101.db –
Modified to reflect new device support module.
Added Joerger VSxx scaler.
Added support for Acromag 9210 and 9440
Added new vmeTest test application. It's a menu-driven application that provides simple VME read/write operations.
This is the first release of the synApps vme module. Version numbering for this module begins with 2.3 because this module was split from version 2.2 of the std module, and I wanted to retain the CVS histories of module contents.
This version is intended to build with EPICS base 3.14.5. Differences from software as previously released in std 2.2:
Converted to EPICS 3.14.
VME_DAC_SETTINGS.req, VME_DAC_POSITIONS.req - New files