<2002> 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | <2002> 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: base max thread priority |
From: | Eric Norum <[email protected]> |
To: | Jeff Hill <[email protected]> |
Cc: | 'Marty Kraimer' <[email protected]>, 'Till Straumann' <[email protected]>, "'Johnson, Andrew N.'" <[email protected]> |
Date: | Wed, 27 Nov 2002 10:07:19 -0600 |
On Wednesday, November 27, 2002, at 09:44 AM, Jeff Hill wrote:
It seems that you could discuss that, at least on RTEMS, the scan threads might run above the RTEMS network threads in priority because the EPICS scan threads do not call directly into the network stack, and their periodicity should perhaps not be disturbed by network loading.
Good point.This would make the scan threads applicable to harder real-time applications -- assuming that the iocsh thread priority was reduced, too.
Of course the issue of starvation of network/iocsh threads again arises. This is tricky stuff.... -- Eric Norum <[email protected]> Department of Electrical Engineering University of Saskatchewan Saskatoon, Canada. Phone: (306) 966-5394 FAX: (306) 966-5407