EPICS Home

Experimental Physics and Industrial Control System


 
2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  <2020 Index 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  <2020
<== Date ==> <== Thread ==>

Subject: Problem booting vxWorks with base 7.0.4
From: Mark Rivers via Core-talk <core-talk at aps.anl.gov>
To: "'Johnson, Andrew N.'" <anj at anl.gov>
Cc: "core-talk at aps.anl.gov" <core-talk at aps.anl.gov>
Date: Wed, 3 Jun 2020 23:25:20 +0000
Hi Andrew,


I just updated one of my vxWorks IOCs to base 7.0.4.  It is failing to boot correctly.  I get these errors after iocInit.  This IOC was running fine with base 7.0.3.1.



reboot_restore: done with file 'auto_settings.sav'

discoverInterfaces(): unable to fetch network interface configuration
2020-06-03T23:19:10.507 Failed to introspect interfaces or no network interfaces available.
2020-06-03T23:19:10.507 No client broadcast addresses found or specified - empty address list!
osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
Warning: RSRV has empty beacon address list
iocRun: All initialization complete
discoverInterfaces(): unable to fetch network interface configuration
0xbe8d80 (tShell0): Unhandled C++ exception resulted in call to terminate
osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)


osiLocalAddr(): SIOCGIFCONF ioctl failed because "S_errno_ENXIO"


Any idea what is wrong?


Thanks,
Mark


The complete IOC boot is below.






boot device          : dc
unit number          : 0
processor number     : 0
host name            : corvette
file name            : /usr/local/vw/VX6941/mv2700-dev6-debug
inet on ethernet (e) : 164.54.160.94:ffffff00
host inet (h)        : 164.54.160.82
user (u)             : iocboot
flags (f)            : 0x0
target name (tn)     : ioc13idc
startup script (s)   : /home/epics/support/CARS/iocBoot/ioc13idc/st.cmd

Attached TCP/IP interface to dc0.
Attaching network interface lo0... done.
Loading... 2228656
Starting at 0x100000...

Booting mv2700...

Adding 6996 symbols for standalone.


 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)
 ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]
 ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]
 ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]
 ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]]
 ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]
 ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]
 ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]
 ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks 6.9
 ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.13
 ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-2014

 CPU: Motorola MVME2700 - MPC 750.  Processor #0.
 Memory Size: 0x8000000 (128Mb).  BSP version 2.0/3-dev6-debug.
 Created: Jul 27 2015 17:59:12
 ED&R Policy Mode: Deployed
 WDB Comm Type: WDB_COMM_END
 WDB: Agent Disabled.

 VxWorks 6.9.4.1 on Motorola MVME2700 - MPC 750
 BSP version 2.0/3-dev6-debug built Jul 27 2015 17:59:12

                        NOTICE TO USERS

This is a Federal computer system and is the property of the United
States Government.  It is for authorized use only.  Users (authorized
or unauthorized) have no explicit or implicit expectation of privacy.
Any or all uses of this system and all files on this system may be
intercepted, monitored, recorded, copied, audited, inspected, and
disclosed to authorized site, Department of Energy, and law enforcement
personnel, as well as authorized officials of other agencies, both
domestic and foreign.  By using this system, the user consents to such
interception, monitoring, recording, copying, auditing, inspection, and
disclosure at the discretion of authorized site or Department of Energy
personnel.  Unauthorized or improper use of this system may result in
administrative disciplinary action and civil and criminal penalties.  By
continuing to use this system you indicate your awareness of and consent
to these terms and conditions of use.  LOG OFF IMMEDIATELY if you do
not agree to the conditions stated in this warning.

apsShellInit: Suspending telnet task ipcom_telnetd (0xbbed60)
Opening startup script /home/epics/support/CARS/iocBoot/ioc13idc/st.cmd ... Ok

# vxWorks startup file
< cdCommands
startup = "/home/epics/support/CARS/iocBoot/ioc13idc"
New symbol "startup" added to kernel symbol table.
startup = 0xbec250: value = 12501664 = 0xbec2a0 = startup + 0x50
putenv("IOC=ioc13idc")
value = 0 = 0x0
top = "/home/epics/support/CARS"
New symbol "top" added to kernel symbol table.
top = 0xbec320: value = 12501872 = 0xbec370 = 'p' = top + 0x50
putenv("TOP=/home/epics/support/CARS")
value = 0 = 0x0
topbin = "/home/epics/support/CARS/bin/vxWorks-ppc32"
New symbol "topbin" added to kernel symbol table.
topbin = 0xbec420: value = 12502688 = 0xbec6a0 = topbin + 0x280
support = "/corvette/home/epics/support"
New symbol "support" added to kernel symbol table.
support = 0xbec6e0: value = 12502832 = 0xbec730 = '0' = support + 0x50
putenv("SUPPORT=/corvette/home/epics/support")
value = 0 = 0x0
supportbin = "/corvette/home/epics/support/bin/vxWorks-ppc32"
New symbol "supportbin" added to kernel symbol table.
supportbin = 0xbec7f0: value = 12503104 = 0xbec840 = '@' = supportbin + 0x50
allen_bradley = "/corvette/home/epics/support/allenBradley-2-3"
New symbol "allen_bradley" added to kernel symbol table.
allen_bradley = 0xbec880: value = 12503264 = 0xbec8e0 = allen_bradley + 0x60
putenv("ALLEN_BRADLEY=/corvette/home/epics/support/allenBradley-2-3")
value = 0 = 0x0
area_detector = "/corvette/home/epics/support/areaDetector-3-8"
New symbol "area_detector" added to kernel symbol table.
area_detector = 0xbec9d0: value = 12503600 = 0xbeca30 = '0' = area_detector + 0x60
putenv("AREA_DETECTOR=/corvette/home/epics/support/areaDetector-3-8")
value = 0 = 0x0
asyn = "/corvette/home/epics/support/asyn-4-38"
New symbol "asyn" added to kernel symbol table.
asyn = 0xbeb290: value = 12497632 = 0xbeb2e0 = asyn + 0x50
putenv("ASYN=/corvette/home/epics/support/asyn-4-38")
value = 0 = 0x0
asynbin = "/corvette/home/epics/support/asyn-4-38/bin/vxWorks-ppc32"
New symbol "asynbin" added to kernel symbol table.
asynbin = 0xbeb3c0: value = 12497936 = 0xbeb410 = asynbin + 0x50
adsupport = "/corvette/home/epics/support/areaDetector-3-8/ADSupport"
New symbol "adsupport" added to kernel symbol table.
adsupport = 0xbeb460: value = 12498096 = 0xbeb4b0 = adsupport + 0x50
putenv("ADSUPPORT=/corvette/home/epics/support/areaDetector-3-8/ADSupport")
value = 0 = 0x0
adsupportbin = "/corvette/home/epics/support/areaDetector-3-8/ADSupport/bin/vxWorks-ppc32"
New symbol "adsupportbin" added to kernel symbol table.
adsupportbin = 0xbeb5d0: value = 12498480 = 0xbeb630 = '0' = adsupportbin + 0x60
adcore = "/corvette/home/epics/support/areaDetector-3-8/ADCore"
New symbol "adcore" added to kernel symbol table.
adcore = 0xbeb690: value = 12498656 = 0xbeb6e0 = adcore + 0x50
putenv("ADCORE=/corvette/home/epics/support/areaDetector-3-8/ADCore")
value = 0 = 0x0
autosave = "/corvette/home/epics/support/autosave-5-10"
New symbol "autosave" added to kernel symbol table.
autosave = 0xbeb7d0: value = 12498976 = 0xbeb820 = ' ' = autosave + 0x50
putenv("AUTOSAVE=/corvette/home/epics/support/autosave-5-10")
value = 0 = 0x0
autosavebin = "/corvette/home/epics/support/autosave-5-10/bin/vxWorks-ppc32"
New symbol "autosavebin" added to kernel symbol table.
autosavebin = 0xbeb920: value = 12499312 = 0xbeb970 = 'p' = autosavebin + 0x50
busy = "/corvette/home/epics/support/busy-1-7-2"
New symbol "busy" added to kernel symbol table.
busy = 0xbeb9c0: value = 12499472 = 0xbeba10 = busy + 0x50
putenv("BUSY=/corvette/home/epics/support/busy-1-7-2")
value = 0 = 0x0
busybin = "/corvette/home/epics/support/busy-1-7-2/bin/vxWorks-ppc32"
New symbol "busybin" added to kernel symbol table.
busybin = 0xbebaf0: value = 12499776 = 0xbebb40 = '@' = busybin + 0x50
calc = "/corvette/home/epics/support/calc-3-7-3"
New symbol "calc" added to kernel symbol table.
calc = 0xbebb90: value = 12499936 = 0xbebbe0 = calc + 0x50
putenv("CALC=/corvette/home/epics/support/calc-3-7-3")
value = 0 = 0x0
calcbin = "/corvette/home/epics/support/calc-3-7-3/bin/vxWorks-ppc32"
New symbol "calcbin" added to kernel symbol table.
calcbin = 0xbebcc0: value = 12500240 = 0xbebd10 = calcbin + 0x50
sncseq = "/corvette/home/epics/support/seq-2-2-5"
New symbol "sncseq" added to kernel symbol table.
sncseq = 0xbebd60: value = 12500400 = 0xbebdb0 = sncseq + 0x50
putenv("SNCSEQ=/corvette/home/epics/support/seq-2-2-5")
value = 0 = 0x0
sncseqbin = "/corvette/home/epics/support/seq-2-2-5/bin/vxWorks-ppc32"
New symbol "sncseqbin" added to kernel symbol table.
sncseqbin = 0xbebca0: value = 12510992 = 0xbee710
sscan = "/corvette/home/epics/support/sscan-2-11-3"
New symbol "sscan" added to kernel symbol table.
sscan = 0xbee760: value = 12511152 = 0xbee7b0 = sscan + 0x50
putenv("SSCAN=/corvette/home/epics/support/sscan-2-11-3")
value = 0 = 0x0
deviocstats = "/corvette/home/epics/support/devIocStats-3-1-16"
New symbol "deviocstats" added to kernel symbol table.
deviocstats = 0xbee880: value = 12511440 = 0xbee8d0 = deviocstats + 0x50
putenv("DEVIOCSTATS=/corvette/home/epics/support/devIocStats-3-1-16")
value = 0 = 0x0
deviocstatsbin = "/corvette/home/epics/support/devIocStats-3-1-16/bin/vxWorks-ppc32"
New symbol "deviocstatsbin" added to kernel symbol table.
deviocstatsbin = 0xbee9d0: value = 12511792 = 0xbeea30 = '0' = deviocstatsbin + 0x60
epics_base = "/corvette/usr/local/epics/base-7.0.4"
New symbol "epics_base" added to kernel symbol table.
epics_base = 0xbeea90: value = 12511968 = 0xbeeae0 = epics_base + 0x50
putenv("EPICS_BASE=/corvette/usr/local/epics/base-7.0.4")
value = 0 = 0x0
epics_basebin = "/corvette/usr/local/epics/base-7.0.4/bin/vxWorks-ppc32"
New symbol "epics_basebin" added to kernel symbol table.
epics_basebin = 0xbeebc0: value = 12512288 = 0xbeec20 = ' ' = epics_basebin + 0x60
adandor = "/corvette/home/epics/support/areaDetector-3-8/ADAndor"
New symbol "adandor" added to kernel symbol table.
adandor = 0xbeec70: value = 12512448 = 0xbeecc0 = adandor + 0x50
putenv("ADANDOR=/corvette/home/epics/support/areaDetector-3-8/ADAndor")
value = 0 = 0x0
adroper = "/corvette/home/epics/support/areaDetector-3-8/ADRoper"
New symbol "adroper" added to kernel symbol table.
adroper = 0xbeedc0: value = 12512784 = 0xbeee10 = adroper + 0x50
putenv("ADROPER=/corvette/home/epics/support/areaDetector-3-8/ADRoper")
value = 0 = 0x0
adlightfield = "/corvette/home/epics/support/areaDetector-3-8/ADLightField"
New symbol "adlightfield" added to kernel symbol table.
adlightfield = 0xbeef10: value = 12513136 = 0xbeef70 = 'p' = adlightfield + 0x60
putenv("ADLIGHTFIELD=/corvette/home/epics/support/areaDetector-3-8/ADLightField")
value = 0 = 0x0
admar345 = "/corvette/home/epics/support/areaDetector-3-8/ADmar345"
New symbol "admar345" added to kernel symbol table.
admar345 = 0xbf0040: value = 12517520 = 0xbf0090 = admar345 + 0x50
putenv("ADMAR345=/corvette/home/epics/support/areaDetector-3-8/ADmar345")
value = 0 = 0x0
admarccd = "/corvette/home/epics/support/areaDetector-3-8/ADmarCCD"
New symbol "admarccd" added to kernel symbol table.
admarccd = 0xbf0190: value = 12517856 = 0xbf01e0 = admarccd + 0x50
putenv("ADMARCCD=/corvette/home/epics/support/areaDetector-3-8/ADmarCCD")
value = 0 = 0x0
adperkinelmer = "/corvette/home/epics/support/areaDetector-3-8/ADPerkinElmer"
New symbol "adperkinelmer" added to kernel symbol table.
adperkinelmer = 0xbf1290: value = 12522224 = 0xbf12f0 = adperkinelmer + 0x60
putenv("ADPERKINELMER=/corvette/home/epics/support/areaDetector-3-8/ADPerkinElmer")
value = 0 = 0x0
adpilatus = "/corvette/home/epics/support/areaDetector-3-8/ADPilatus"
New symbol "adpilatus" added to kernel symbol table.
adpilatus = 0xbf1410: value = 12522592 = 0xbf1460 = '`' = adpilatus + 0x50
putenv("ADPILATUS=/corvette/home/epics/support/areaDetector-3-8/ADPilatus")
value = 0 = 0x0
adprosilica = "/corvette/home/epics/support/areaDetector-3-8/ADProsilica"
New symbol "adprosilica" added to kernel symbol table.
adprosilica = 0xbf1570: value = 12011088 = 0xb74650 = 'P'
putenv("ADPROSILICA=/corvette/home/epics/support/areaDetector-3-8/ADProsilica")
value = 0 = 0x0
adpointgrey = "/corvette/home/epics/support/areaDetector-3-8/ADPointGrey"
New symbol "adpointgrey" added to kernel symbol table.
adpointgrey = 0xbf17e0: value = 12523568 = 0xbf1830 = '0' = adpointgrey + 0x50
putenv("ADPOINTGREY=/corvette/home/epics/support/areaDetector-3-8/ADPointGrey")
value = 0 = 0x0
adeiger = "/corvette/home/epics/support/areaDetector-3-8/ADEiger"
New symbol "adeiger" added to kernel symbol table.
adeiger = 0xbf1950: value = 12523936 = 0xbf19a0 = adeiger + 0x50
putenv("ADEIGER=/corvette/home/epics/support/areaDetector-3-8/ADEiger")
value = 0 = 0x0
adgenicam = "/corvette/home/epics/support/areaDetector-3-8/ADGenICam"
New symbol "adgenicam" added to kernel symbol table.
adgenicam = 0xbf1aa0: value = 12524272 = 0xbf1af0 = adgenicam + 0x50
putenv("ADGENICAM=/corvette/home/epics/support/areaDetector-3-8/ADGenICam")
value = 0 = 0x0
adspinnaker = "/corvette/home/epics/support/areaDetector-3-8/ADSpinnaker"
New symbol "adspinnaker" added to kernel symbol table.
adspinnaker = 0xbf1c00: value = 12524624 = 0xbf1c50 = 'P' = adspinnaker + 0x50
putenv("ADSPINNAKER=/corvette/home/epics/support/areaDetector-3-8/ADSpinnaker")
value = 0 = 0x0
adaravis = "/corvette/home/epics/support/areaDetector-3-8/ADAravis"
New symbol "adaravis" added to kernel symbol table.
adaravis = 0xbf1d70: value = 12524992 = 0xbf1dc0 = adaravis + 0x50
putenv("ADARAVIS=/corvette/home/epics/support/areaDetector-3-8/ADAravis")
value = 0 = 0x0
advimba = "/corvette/home/epics/support/areaDetector-3-8/ADVimba"
New symbol "advimba" added to kernel symbol table.
advimba = 0xbf1ec0: value = 12525328 = 0xbf1f10 = advimba + 0x50
putenv("ADVIMBA=/corvette/home/epics/support/areaDetector-3-8/ADVimba")
value = 0 = 0x0
cars = "/corvette/home/epics/support/CARS"
New symbol "cars" added to kernel symbol table.
cars = 0xbf1ff0: value = 12525632 = 0xbf2040 = '@' = cars + 0x50
putenv("CARS=/corvette/home/epics/support/CARS")
value = 0 = 0x0
carsbin = "/corvette/home/epics/support/CARS/bin/vxWorks-ppc32"
New symbol "carsbin" added to kernel symbol table.
carsbin = 0xbf2130: value = 12525952 = 0xbf2180 = carsbin + 0x50
cryoconm32 = "/corvette/home/epics/support/CryoconM32"
New symbol "cryoconm32" added to kernel symbol table.
cryoconm32 = 0xbf21d0: value = 12526112 = 0xbf2220 = ' ' = cryoconm32 + 0x50
putenv("CRYOCONM32=/corvette/home/epics/support/CryoconM32")
value = 0 = 0x0
dac128v = "/corvette/home/epics/support/dac128V-2-9"
New symbol "dac128v" added to kernel symbol table.
dac128v = 0xb78580: value = 12027344 = 0xb785d0 = dac128v + 0x50
putenv("DAC128V=/corvette/home/epics/support/dac128V-2-9")
value = 0 = 0x0
dante = "/corvette/home/epics/support/dante-1-0"
New symbol "dante" added to kernel symbol table.
dante = 0xb786b0: value = 12027648 = 0xb78700 = dante + 0x50
putenv("DANTE=/corvette/home/epics/support/dante-1-0")
value = 0 = 0x0
delaygen = "/corvette/home/epics/support/delaygen-1-2-1"
New symbol "delaygen" added to kernel symbol table.
delaygen = 0xb787d0: value = 12027936 = 0xb78820 = ' ' = delaygen + 0x50
putenv("DELAYGEN=/corvette/home/epics/support/delaygen-1-2-1")
value = 0 = 0x0
ip = "/corvette/home/epics/support/ip-2-20-1"
New symbol "ip" added to kernel symbol table.
ip = 0xb78910: value = 12528368 = 0xbf2af0 = cryoconm32 + 0x920
putenv("IP=/corvette/home/epics/support/ip-2-20-1")
value = 0 = 0x0
ipac = "/corvette/home/epics/support/ipac-2-15"
New symbol "ipac" added to kernel symbol table.
ipac = 0xbf2bc0: value = 12528656 = 0xbf2c10 = ipac + 0x50
putenv("IPAC=/corvette/home/epics/support/ipac-2-15")
value = 0 = 0x0
ip330 = "/corvette/home/epics/support/ip330-2-9"
New symbol "ip330" added to kernel symbol table.
ip330 = 0xbf2ce0: value = 12528944 = 0xbf2d30 = '0' = ip330 + 0x50
putenv("IP330=/corvette/home/epics/support/ip330-2-9")
value = 0 = 0x0
ipunidig = "/corvette/home/epics/support/ipUnidig-2-11"
New symbol "ipunidig" added to kernel symbol table.
ipunidig = 0xbf2e00: value = 12529232 = 0xbf2e50 = 'P' = ipunidig + 0x50
putenv("IPUNIDIG=/corvette/home/epics/support/ipUnidig-2-11")
value = 0 = 0x0
mca = "/corvette/home/epics/support/mca-7-8"
New symbol "mca" added to kernel symbol table.
mca = 0xbf2f40: value = 12529552 = 0xbf2f90 = mca + 0x50
putenv("MCA=/corvette/home/epics/support/mca-7-8")
value = 0 = 0x0
mcabin = "/corvette/home/epics/support/mca-7-8/bin/vxWorks-ppc32"
New symbol "mcabin" added to kernel symbol table.
mcabin = 0xbf3070: value = 12529856 = 0xbf30c0 = mcabin + 0x50
meascomp = "/corvette/home/epics/support/measComp-2-5"
New symbol "meascomp" added to kernel symbol table.
meascomp = 0xbf3110: value = 12530016 = 0xbf3160 = '`' = meascomp + 0x50
putenv("MEASCOMP=/corvette/home/epics/support/measComp-2-5")
value = 0 = 0x0
modbus = "/corvette/home/epics/support/modbus-3-0"
New symbol "modbus" added to kernel symbol table.
modbus = 0xbf3240: value = 12042864 = 0xb7c270 = 'p'
putenv("MODBUS=/corvette/home/epics/support/modbus-3-0")
value = 0 = 0x0
modbusbin = "/corvette/home/epics/support/modbus-3-0/bin/vxWorks-ppc32"
New symbol "modbusbin" added to kernel symbol table.
modbusbin = 0xb7c2b0: value = 12054416 = 0xb7ef90
motor = "/corvette/home/epics/support/motor-7-0"
New symbol "motor" added to kernel symbol table.
motor = 0xbb64c0: value = 12054544 = 0xb7f010
putenv("MOTOR=/corvette/home/epics/support/motor-7-0")
value = 0 = 0x0
motorbin = "/corvette/home/epics/support/motor-7-0/bin/vxWorks-ppc32"
New symbol "motorbin" added to kernel symbol table.
motorbin = 0xb7f050: value = 12055136 = 0xb7f260 = '`' = motorbin + 0x210
optics = "/corvette/home/epics/support/optics-2-13-3"
New symbol "optics" added to kernel symbol table.
optics = 0xb7f2b0: value = 12055296 = 0xb7f300 = optics + 0x50
putenv("OPTICS=/corvette/home/epics/support/optics-2-13-3")
value = 0 = 0x0
quadem = "/corvette/home/epics/support/quadEM-9-2-1"
New symbol "quadem" added to kernel symbol table.
quadem = 0xb7f3e0: value = 12055600 = 0xb7f430 = '0' = quadem + 0x50
putenv("QUADEM=/corvette/home/epics/support/quadEM-9-2-1")
value = 0 = 0x0
quadembin = "/corvette/home/epics/support/quadEM-9-2-1/bin/vxWorks-ppc32"
New symbol "quadembin" added to kernel symbol table.
quadembin = 0xb7f520: value = 12055920 = 0xb7f570 = 'p' = quadembin + 0x50
softglue = "/corvette/home/epics/support/softGlue-2-8-2"
New symbol "softglue" added to kernel symbol table.
softglue = 0xb7f5c0: value = 12056080 = 0xb7f610 = softglue + 0x50
putenv("SOFTGLUE=/corvette/home/epics/support/softGlue-2-8-2")
value = 0 = 0x0
std = "/corvette/home/epics/support/std-3-6-1"
New symbol "std" added to kernel symbol table.
std = 0xb7f6f0: value = 12056384 = 0xb7f740 = '@' = std + 0x50
putenv("STD=/corvette/home/epics/support/std-3-6-1")
value = 0 = 0x0
stdbin = "/corvette/home/epics/support/std-3-6-1/bin/vxWorks-ppc32"
New symbol "stdbin" added to kernel symbol table.
stdbin = 0xb7f820: value = 12056688 = 0xb7f870 = 'p' = stdbin + 0x50
stream = "/corvette/home/epics/support/stream-2-8-9"
New symbol "stream" added to kernel symbol table.
stream = 0xb7f8c0: value = 12056848 = 0xb7f910 = stream + 0x50
putenv("STREAM=/corvette/home/epics/support/stream-2-8-9")
value = 0 = 0x0
tomoscan = "/corvette/home/epics/support/tomoscan"
New symbol "tomoscan" added to kernel symbol table.
tomoscan = 0xb7f9f0: value = 12057152 = 0xb7fa40 = '@' = tomoscan + 0x50
putenv("TOMOSCAN=/corvette/home/epics/support/tomoscan")
value = 0 = 0x0
tomoscanbin = "/corvette/home/epics/support/tomoscan/bin/vxWorks-ppc32"
New symbol "tomoscanbin" added to kernel symbol table.
tomoscanbin = 0xb7fb20: value = 12057456 = 0xb7fb70 = 'p' = tomoscanbin + 0x50
tpmac = "/corvette/home/epics/support/tpmac-3-11dls5"
New symbol "tpmac" added to kernel symbol table.
tpmac = 0xb7fbc0: value = 12057616 = 0xb7fc10 = tpmac + 0x50
putenv("TPMAC=/corvette/home/epics/support/tpmac-3-11dls5")
value = 0 = 0x0
tpmacbin = "/corvette/home/epics/support/tpmac-3-11dls5/bin/vxWorks-ppc32"
New symbol "tpmacbin" added to kernel symbol table.
tpmacbin = 0xb7fd00: value = 12057936 = 0xb7fd50 = 'P' = tpmacbin + 0x50
vac = "/corvette/home/epics/support/vac-1-9"
New symbol "vac" added to kernel symbol table.
vac = 0xb7fda0: value = 12058096 = 0xb7fdf0 = vac + 0x50
putenv("VAC=/corvette/home/epics/support/vac-1-9")
value = 0 = 0x0
vacbin = "/corvette/home/epics/support/vac-1-9/bin/vxWorks-ppc32"
New symbol "vacbin" added to kernel symbol table.
vacbin = 0xb7fed0: value = 12058400 = 0xb7ff20 = ' ' = vacbin + 0x50
vme = "/corvette/home/epics/support/vme-2-9-2"
New symbol "vme" added to kernel symbol table.
vme = 0xb7ff70: value = 12058560 = 0xb7ffc0 = vme + 0x50
putenv("VME=/corvette/home/epics/support/vme-2-9-2")
value = 0 = 0x0
< ../nfsCommandsGSE
# Set the default gateway
routec "-n add default 164.54.160.1"
    add net 0.0.0.0: netmask 0.0.0.0: gateway 164.54.160.1
value = 0 = 0x0

# The following line eliminates "cksum: out of data" messages due to DHCP
#proxyPortFwdOff(67)

# Set the UNIX uid/gid to the EPICS account
## nfsAuthUnixSet("corvette",401,400,0,0)
## nfsAuthUnixSet("ion",1001,400,0,0)
## nfsAuthUnixSet("ion", 849601092, 400, 0, 0)
##

nfsAuthUnixSet("corvette", 849601092, 849600513, 0, 0)
value = 0 = 0x0

# Mount drives with NFS
nfsMount("corvette","/home","/corvette/home")
value = 0 = 0x0
nfsMount("corvette","/home","/home")
value = 0 = 0x0

# Define locations for logging and for APS EPICS process variables
# No longer need 164.54.188.50 since a local PV gateway
#  provides APS variables, MLR 5/31/00
putenv("EPICS_IOC_LOG_INET=164.54.160.82")
value = 0 = 0x0
# Set size large enough for double waveforms N=11000
putenv("EPICS_CA_MAX_ARRAY_BYTES=88000")
value = 0 = 0x0

cd topbin
value = 0 = 0x0
load("CARSApp.munch")
Unexpected problem with CA circuit to server "ioc13idc.cars.aps.anl.gov:5064" was "Connection reset by peer" - disconnecting

                                                                                                                            Wed Jun 03 18:18:34 CDT 2020
                                                                                                                                                        medmCAExceptionHandlerCb: Channel Access Exception:
                            Channel Name: Unavailable
                                                       Native Type: Unavailable
                                                                                 Native Count: 0
                                                                                                  Access: Unavailable
                                                                                                                       Host: Unavailable
                                                                                                                                          Message: Virtual circuit disconnect
                                                                                                                                                                               Context: ioc13idc.cars.aps.anl.gov:5064
                                       Requested Type: TYPENOTCONN
                                                                    Requested Count: 0
                                                                                        Source File: ../cac.cpp
                                                                                                                 Line number: 1223
                                                                                                                                  osdMonotonicInit: Measuring CPU time-base frequency ... 16666123 ticks/sec.
value = 12513744 = 0xbef1d0 = adlightfield + 0x2c0

# Increase size of errlog buffer
errlogInit(20000)
value = 0 = 0x0

# Tell EPICS all about the record types, device-support modules, drivers,
# etc. in this build.
dbLoadDatabase("$(CARS)/dbd/CARSVX.dbd")
value = 0 = 0x0
CARSVX_registerRecordDeviceDriver(pdbbase)
value = 0 = 0x0

cd startup
value = 0 = 0x0
< industryPack.cmd
# The first carrier in our system is a TEWS TVME200
# The argument to ipacAddTVME200 is the values of the 6 switches on the board
# In thise case 30 = base address 3000
#                2 = interrupt mapping 4, 5, 2, 1, 4, 5, 2, 1
#                F = A32 address space, 8MB per slot
#               A0 = A0000000 base address in A32 space
ipacAddTVME200("302FA0")
value = 0 = 0x0
#ipacAddVIPC616_01("0x3000,0xa0000000")
ipacAddVIPC616_01("0x3400,0xa2000000")
value = 0 = 0x0

# Initialize Octal UART stuff
tyGSOctalDrv 2
value = 0 = 0x0
tyGSOctalModuleInit("UART0", "232", 0x80, 0, 0)
value = 0 = 0x0
tyGSOctalModuleInit("UART1", "232", 0x81, 0, 1)
value = 1 = 0x1

# Initialize Acromag IP-330 ADC
# Ip330 *initIp330(
#   const char *portName, int carrier, int slot,
#   const char *typeString, const char *rangeString,
#   int firstChan, int lastChan,
#   int intVec)
# portName    = name to give this asyn port
# carrier     = IPAC carrier number (0, 1, etc.)
# slot        = IPAC slot (0,1,2,3, etc.)
# typeString  = "D" or "S" for differential or single-ended
# rangeString = "-5to5","-10to10","0to5", or "0to10"
#               This value must match hardware setting selected
# firstChan   = first channel to be digitized.  This must be in the range:
#               0 to 31 (single-ended)
#               0 to 15 (differential)
# lastChan    = last channel to be digitized
# intVec        Interrupt vector
initIp330("Ip330_1",0,2,"D","-5to5",0,15,120)
value = 0 = 0x0

# int configIp330(
#   const char *portName,
#   int scanMode, const char *triggerString,
#   int microSecondsPerScan, int secondsBetweenCalibrate)
# portName    = name of aysn port created with initIp330
# scanMode    = scan mode:
#               0 = disable
#               1 = uniformContinuous
#               2 = uniformSingle
#               3 = burstContinuous (normally recommended)
#               4 = burstSingle
#               5 = convertOnExternalTriggerOnly
# triggerString = "Input" or "Output". Selects the direction of the external
#               trigger signal.
# microSecondsPerScan = repeat interval to digitize all channels
#               The minimum theoretical time is 15 microseconds times the
#               number of channels, but a practical limit is probably 100
#               microseconds.
# secondsBetweenCalibrate = number of seconds between calibration cycles.
#               If zero then there will be no periodic calibration, but
#               one calibration will still be done at initialization.
configIp330("Ip330_1", 3,"Input",1000,0)
value = 0 = 0x0

# int initFastSweep(char *portName, char *inputName,
#                   int maxSignals, int maxPoints)
# portName   = asyn port name for this port
# inputName  = name of input port
# maxSignals = maximum number of input signals.
# maxPoints  = maximum number of points in a sweep.  The amount of memory
#              allocated will be maxPoints*maxSignals*4 bytes
initFastSweep("Ip330Sweep1","Ip330_1",6,2048)
value = 0 = 0x0
dbLoadTemplate("Ip330_ADC.template")
value = 0 = 0x0

#Initialize Greenspring IP-Unidig
# initIpUnidig(char *portName,
#              int carrier,
#              int slot,
#              int msecPoll,
#              int intVec,
#              int risingMask,
#              int fallingMask,
#              int biMask,
#              int maxClients)
# portName  = name to give this asyn port
# carrier     = IPAC carrier number (0, 1, etc.)
# slot        = IPAC slot (0,1,2,3, etc.)
# msecPoll    = polling time for input bits in msec.
# intVec      = interrupt vector
# risingMask  = mask of bits to generate interrupts on low to high (24 bits)
# fallingMask = mask of bits to generate interrupts on high to low (24 bits)
initIpUnidig("Unidig1", 0, 3, 100, 116, 0xffffff, 0xffffff)
value = 0 = 0x0
initIpUnidig("Unidig2", 1, 1, 100, 117, 0xffffff, 0xffffff)
value = 0 = 0x0
initIpUnidig("Unidig3", 1, 2, 100, 118, 0xffffff, 0xffffff)
value = 0 = 0x0

dbLoadTemplate("ipUnidig.substitutions")
value = 0 = 0x0
dbLoadTemplate("filter.substitutions")
value = 0 = 0x0


# DAC in first slot on second board
# Initialize Systran DAC
# initDAC128V(char *portName, int carrier, int slot)
# portName  = name to give this asyn port
# carrier     = IPAC carrier number (0, 1, etc.)
# slot        = IPAC slot (0,1,2,3, etc.)
initDAC128V("DAC1", 1, 0)
value = 0 = 0x0
dbLoadTemplate("DAC.template")
value = 0 = 0x0

< serial.cmd
# tyGSAsynInit(char *port, char *moduleName, int channel, int baud,
#              char parity, int sbits, int dbits, char handshake,
#              char *inputEos, char *outputEos)
tyGSAsynInit("serial1", "UART0", 0,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial2", "UART0", 1,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial3", "UART0", 2,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial4", "UART0", 3,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial5", "UART0", 4, 19200,'N',1,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial6", "UART0", 5, 19200,'N',1,8,'N',"\r\n","\n") /* Keithley 2000 */
value = 0 = 0x0
tyGSAsynInit("serial7", "UART0", 6,  9600,'N',2,8,'N',"\r","\r") /* Pelco CM6700 */
value = 0 = 0x0
tyGSAsynInit("serial8", "UART0", 7, 19200,'N',1,8,'N',"\r\n","\n") /* Keithley 2000 */
value = 0 = 0x0
tyGSAsynInit("serial9", "UART1", 0,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial10","UART1", 1,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial11","UART1", 2,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial12","UART1", 3,  9600,'N',2,8,'N',"\r","\r") /* SRS570 */
value = 0 = 0x0
tyGSAsynInit("serial13","UART1", 4,  9600,'N',1,8,'N',"\r","\r") /* Unused */
value = 0 = 0x0
tyGSAsynInit("serial14","UART1", 5,  9600,'N',1,8,'N',"\r","\r") /* Unused */
value = 0 = 0x0
tyGSAsynInit("serial15","UART1", 6,  9600,'N',2,8,'N',"\r","\r") /* Unused */
value = 0 = 0x0
tyGSAsynInit("serial16","UART1", 7,  9600,'N',1,8,'N',"\r","\r") /* Unused */
value = 0 = 0x0

# Load asyn records on all serial ports
dbLoadTemplate("asynRecord.template")
value = 0 = 0x0

# First Octal UART for microprobe experiments
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A1,PORT=serial1")
value = 0 = 0x0
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A2,PORT=serial2")
value = 0 = 0x0
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A3,PORT=serial3")
value = 0 = 0x0
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A4,PORT=serial4")
value = 0 = 0x0
# dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A5,PORT=serial5")
# dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A6,PORT=serial6")
# Serial 7 is Pelco CM6700 video switch
dbLoadTemplate("Pelco_CM6700.substitutions")
value = 0 = 0x0

dbLoadRecords("$(IP)/db/Keithley2kDMM_mf.db","P=13IDC:,Dmm=DMM1,PORT=serial6")
value = 0 = 0x0
dbLoadRecords("$(IP)/db/Keithley2kDMM_mf.db","P=13IDC:,Dmm=DMM2,PORT=serial8")
value = 0 = 0x0

# Second Octal UART for diffractometer experiments
# Serial ports 1 thru 4 are for SR570 current amplifiers
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B1,PORT=serial9")
value = 0 = 0x0
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B2,PORT=serial10")
value = 0 = 0x0
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B3,PORT=serial11")
value = 0 = 0x0
dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B4,PORT=serial12")
value = 0 = 0x0


# Set debugging flags
mcaRecordDebug = 0
mcaRecordDebug = 0x20c4958: value = 0 = 0x0
drvSTR7201Debug = 0
New symbol "drvSTR7201Debug" added to kernel symbol table.
drvSTR7201Debug = 0x266ece0: value = 0 = 0x0
devSTR7201Debug = 0
New symbol "devSTR7201Debug" added to kernel symbol table.
devSTR7201Debug = 0x2620a50: value = 0 = 0x0
save_restoreDebug = 0
save_restoreDebug = 0x20c5e68: value = 0 = 0x0
devXSC8Debug = 0
New symbol "devXSC8Debug" added to kernel symbol table.
devXSC8Debug = 0x226b340: value = 0 = 0x0
drvXPSC8Debug = 0
New symbol "drvXPSC8Debug" added to kernel symbol table.
drvXPSC8Debug = 0x2647db0: value = 0 = 0x0
# Asyn XPS driver debug variable 0-5
asynXPSC8Debug = 0
New symbol "asynXPSC8Debug" added to kernel symbol table.
asynXPSC8Debug = 0x259ab00: value = 0 = 0x0

# Load database
# dbLoadRecords("$(STD)/db/scaler.db", "P=13IDC:,S=scaler1,OUT=#C0 S0 @,FREQ=1e7,DTYP=Joerger VSC8/16")

dbLoadTemplate("motors.template")
value = 0 = 0x0

# Multichannel analyzer stuff
# AIMConfig(portName, ethernet_address, portNumber(1 or 2), maxChans,
#           maxSignals, maxSequences, ethernetDevice)
# This AIM moved to 13BMC.  No AIM in IDC now.
##AIMConfig("NI6E6/1", 0x6E6, 1, 2048, 1, 1, "dc0")
##AIMConfig("NI6E6/2", 0x6E6, 2, 2048, 4, 1, "dc0")
##dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=aim_adc1,DTYP=asynMCA,INP=@asyn(NI6E6/1 0),NCHAN=2048")
##dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=aim_mcs1,DTYP=asynMCA,INP=@asyn(NI6E6/2 0),NCHAN=2048")

#icbConfig(portName, module, ethernetAddress, icbAddress, moduleType)
#   portName to give to this asyn port
#   ethernetAddress - Ethernet address of module, low order 16 bits
#   icbAddress - rotary switch setting inside ICB module
#   moduleType
#      0 = ADC
#      1 = Amplifier
#      2 = HVPS
#      3 = TCA
#      4 = DSP
##icbConfig("icbAdc1", 0x6e6, 5, 0)
##dbLoadRecords("$(MCA)/db/icb_adc.db", "P=13IDC:,ADC=adc1,PORT=icbAdc1")
#icbConfig("icbAmp1", 0x6e6, 3, 1)
#dbLoadRecords"$(MCA)/db/icb_amp.db", "P=13IDC:,AMP=amp1,PORT=icbAmp1")
#icbConfig("icbHvps1", 0x6e6, 2, 2)
#dbLoadRecords("$(MCA)/db/icb_hvps.db", "P=13IDC:,HVPS=hvps1,PORT=icbHvps1,LIMIT=1000")

# SIS3820 MCS
##<SIS3820_8.cmd

# SIS3801 MCS
iocsh "SIS3801_8.cmd"
# Example vxWorks iocsh startup file for SIS3801
epicsEnvSet("PREFIX",                   "13IDC:SIS1:")
epicsEnvSet("RNAME",                    "mca")
epicsEnvSet("MAX_SIGNALS",              "8")
epicsEnvSet("MAX_CHANS",                "10100")
epicsEnvSet("PORT",                     "SIS3801/1")
# For MCA records FIELD=READ, for waveform records FIELD=PROC
epicsEnvSet("FIELD",                    "READ")
#drvSIS3801Config("Port name",
#                  baseAddress,
#                  interruptVector,
#                  int interruptLevel,
#                  channels,
#                  signals)
drvSIS3801Config(SIS3801/1, 0x90000000, 220, 6, 10100, 8)
# This loads the scaler record and supporting records
dbLoadRecords("/corvette/home/epics/support/std-3-6-1/db/scaler32.db", "P=13IDC:, S=scaler1, DTYP=Asyn Scaler, OUT=@asyn(SIS3801/1), FREQ=25000000")
# This database provides the support for the MCS functions
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/SIS38XX.template", "P=13IDC:SIS1:, PORT=SIS3801/1, SCALER=13IDC:SIS1:scaler1")
# Load either MCA or waveform records below
# The number of records loaded must be the same as MAX_SIGNALS defined above
# Load the MCA records
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca1,  DTYP=asynMCA, INP=@asyn(SIS3801/1 0),  PREC=3, CHANS=10100")
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca2,  DTYP=asynMCA, INP=@asyn(SIS3801/1 1),  PREC=3, CHANS=10100")
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca3,  DTYP=asynMCA, INP=@asyn(SIS3801/1 2),  PREC=3, CHANS=10100")
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca4,  DTYP=asynMCA, INP=@asyn(SIS3801/1 3),  PREC=3, CHANS=10100")
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca5,  DTYP=asynMCA, INP=@asyn(SIS3801/1 4),  PREC=3, CHANS=10100")
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca6,  DTYP=asynMCA, INP=@asyn(SIS3801/1 5),  PREC=3, CHANS=10100")
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca7,  DTYP=asynMCA, INP=@asyn(SIS3801/1 6),  PREC=3, CHANS=10100")
dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca8,  DTYP=asynMCA, INP=@asyn(SIS3801/1 7),  PREC=3, CHANS=10100")
asynSetTraceIOMask(SIS3801/1,0,2)
#asynSetTraceMask("$(PORT)",0,0xff)
# Exit iocsh
exit
value = 0 = 0x0

### Allstop, alldone
dbLoadRecords("$(MOTOR)/db/motorUtil.db","P=13IDC:")
value = 0 = 0x0

### Scan-support software
# crate-resident scan.  This executes 1D, 2D, 3D, and 4D scans, and caches
# 1D data, but it doesn't store anything to disk.  (You need the data catcher
# or the equivalent for that.)  This database is configured to use the
# "alldone" database (above) to figure out when motors have stopped moving
# and it's time to trigger detectors.

dbLoadRecords("$(SSCAN)/db/scan.db","P=13IDC:,MAXPTS1=2000,MAXPTS2=500,MAXPTS3=20,MAXPTS4=5,MAXPTSH=10")
value = 0 = 0x0

# A set of scan parameters for each positioner.  This is a convenience
# for the user.  It can contain an entry for each scannable thing in the
# crate.
dbLoadTemplate("scanParms.template")
value = 0 = 0x0

dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_1,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 0)")
value = 0 = 0x0
dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_2,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 1)")
value = 0 = 0x0
dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_3,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 2)")
value = 0 = 0x0
dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_4,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 3)")
value = 0 = 0x0
# added 2-05 for split ion chmaber
dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_5,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 4)")
value = 0 = 0x0
dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_6,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 5)")
value = 0 = 0x0

# Miscellaneous PV's
dbLoadRecords("$(STD)/db/misc.db","P=13IDC:")
value = 0 = 0x0

# User calc stuff
epicsEnvSet("PREFIX", "13IDC:")
value = 0 = 0x0
iocsh("../calc_GSECARS.iocsh")
### Stuff for user programming ###
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userCalcGlobalEnable.db","P=13IDC:")
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userCalcs10.db","P=13IDC:")
#appendToFile("$(BUILT_SETTINGS)", '$(P)userCalcEnable')
#dbLoadRecords("$(CALC)/db/userCalcs10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userCalcOuts10.db","P=13IDC:")
#appendToFile("$(BUILT_SETTINGS)", '$(P)userCalcOutEnable')
#dbLoadRecords("$(CALC)/db/userCalcOuts10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userStringCalcs10.db","P=13IDC:")
#appendToFile("$(BUILT_SETTINGS)", '$(P)userStringCalcEnable')
#dbLoadRecords("$(CALC)/db/userStringCalcs10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userArrayCalcs10.db","P=13IDC:,N=2048")
#appendToFile("$(BUILT_SETTINGS)", '$(P)userArrayCalcEnable')
#dbLoadRecords("$(CALC)/db/userArrayCalcs10more.db","P=$(PREFIX),N=30000,N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userTransforms10.db","P=13IDC:")
#appendToFile("$(BUILT_SETTINGS)", '$(P)userTranEnable')
#dbLoadRecords("$(CALC)/db/userTransforms10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userAve10.db","P=13IDC:")
#appendToFile("$(BUILT_SETTINGS)", '$(P)userAveEnable')
#dbLoadRecords("$(CALC)/db/userAve10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
# string sequence (sseq) records
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userStringSeqs10.db","P=13IDC:")
#appendToFile("$(BUILT_SETTINGS)", '$(P)userStringSeqEnable')
#dbLoadRecords("$(CALC)/db/userStringSeqs10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
# editSseq - edit any sseq or seq record
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/editSseq.db", "P=13IDC:,Q=ES:")
doAfterIocInit("seq &editSseq, 'P=13IDC:,Q=ES:'")
# interpolation
#dbLoadRecords("$(CALC)/db/interp.db", "P=$(PREFIX),N=2000")
dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/interpNew.db", "P=13IDC:,Q=1,N=2000")
# pvHistory (in-crate archive of up to three PV's)
dbLoadRecords("/corvette/home/epics/support/std-3-6-1/db/pvHistory.db","P=13IDC:,N=1,MAXSAMPLES=1440")
# busy record
dbLoadRecords("/corvette/home/epics/support/busy-1-7-2/db/busyRecord.db", "P=13IDC:,R=mybusy")
dbLoadRecords("/corvette/home/epics/support/busy-1-7-2/db/busyRecord.db", "P=13IDC:,R=mybusy2")
# Soft function generator
#dbLoadRecords("$(CALC)/db/FuncGen.db","P=$(PREFIX),Q=fgen,OUT=$(PREFIX)m7.VAL")
value = 0 = 0x0

# Experiment description
dbLoadRecords("$(CARS)/db/experiment_info.db","P=13IDC:")
value = 0 = 0x0

# SCA Window for Bede detector
dbLoadRecords("$(CARS)/db/sca_window.db","P=13IDC:,SCA=BEDE,DAC1=DAC1_1,DAC2=DAC1_2,MIN=0,MAX=3")
value = 0 = 0x0

# devIocStats
putenv("ENGINEER=Mark Rivers")
value = 0 = 0x0
putenv("LOCATION=13-ID-C")
value = 0 = 0x0
putenv("GROUP=GSECARS")
value = 0 = 0x0
dbLoadRecords("$(DEVIOCSTATS)/db/iocAdminVxWorks.db","IOC=13IDC:")
value = 0 = 0x0

< ../save_restore.cmd
### save_restore setup
#
# The rest this file does not require modification for standard use, but...
# If you want save_restore to manage its own NFS mount, specify the name and
# IP address of the file server to which save files should be written.
# This currently is supported only on vxWorks.
#save_restoreSet_NFSHost("oxygen", "164.54.52.4")

# status-PV prefix
#save_restoreSet_status_prefix("xxx:")
# Debug-output level
save_restoreSet_Debug(0)
value = 0 = 0x0

# Ok to save/restore save sets with missing values (no CA connection to PV)?
save_restoreSet_IncompleteSetsOk(1)
value = 1 = 0x1
# Save dated backup files?
save_restoreSet_DatedBackupFiles(1)
value = 1 = 0x1

# Number of sequenced backup files to write
save_restoreSet_NumSeqFiles(3)
value = 3 = 0x3
# Time interval between sequenced backups
save_restoreSet_SeqPeriodInSeconds(300)
value = 300 = 0x12c = ','

# specify where save files should be
set_savefile_path(startup, "autosave")
value = 0 = 0x0

###
# specify what save files should be restored.  Note these files must be
# in the directory specified in set_savefile_path(), or, if that function
# has not been called, from the directory current when iocInit is invoked
set_pass0_restoreFile("auto_positions.sav")
value = 0 = 0x0
set_pass0_restoreFile("auto_settings.sav")
value = 0 = 0x0
set_pass1_restoreFile("auto_settings.sav")
value = 0 = 0x0

# load general-purpose interpolation tables with local, user-editable file
# (if interp_settings.req is included in auto_settings.req, the next line
# will overwrite those restored values)
#set_pass1_restoreFile("interp.sav")

###
# specify directories in which to to search for included request files
set_requestfile_path("./")
value = 0 = 0x0
set_requestfile_path(cars,     "CARSApp/Db")
value = 0 = 0x0
set_requestfile_path(adcore,   "ADApp/Db")
value = 0 = 0x0
set_requestfile_path(autosave, "asApp/Db")
value = 0 = 0x0
set_requestfile_path(calc,     "calcApp/Db")
value = 0 = 0x0
set_requestfile_path(dac128v,  "dac128VApp/Db")
value = 0 = 0x0
set_requestfile_path(ip,       "ipApp/Db")
value = 0 = 0x0
set_requestfile_path(mca,      "mcaApp/Db")
value = 0 = 0x0
set_requestfile_path(motor,    "motorApp/Db")
value = 0 = 0x0
set_requestfile_path(optics,   "opticsApp/Db")
value = 0 = 0x0
set_requestfile_path(quadem,   "quadEMApp/Db")
value = 0 = 0x0
set_requestfile_path(softglue, "softGlueApp/Db")
value = 0 = 0x0
set_requestfile_path(sscan,    "sscanApp/Db")
value = 0 = 0x0
set_requestfile_path(softglue, "softGlueApp/Db")
value = 0 = 0x0
set_requestfile_path(std,      "stdApp/Db")
value = 0 = 0x0
set_requestfile_path(vme,      "vmeApp/Db")
value = 0 = 0x0

#dbLoadRecords("$(AUTOSAVE)/db/save_restoreStatus.db", "P=xxx:")

# Date and time of boot
date
2020/06/03 23:18:59.973453
value = 27 = 0x1b

save_restoreSet_status_prefix("13IDC:")
value = 43389634 = 0x29612c2
dbLoadRecords("$(AUTOSAVE)/db/save_restoreStatus.db", "P=13IDC:")
value = 0 = 0x0

# Setup device/driver support addresses, interrupt vectors, etc.

################################################################################
# OMS VME58 driver setup parameters:
#     (1)cards, (2)base address(short, 4k boundary),
#     (3)interrupt vector (0=disable or  64 - 255), (4)interrupt level (1 - 6),
#     (5)motor task polling rate (min=1Hz,max=60Hz)
oms58Setup(6, 0x4000, 190, 5, 10)
value = 0 = 0x0
################################################################################

################################################################################
# Joerger VSC setup parameters:
#     (1)cards, (2)base address(ext, 256-byte boundary),
#     (3)interrupt vector (0=disable or  64 - 255)
# VSCSetup(1, 0xB0000000, 200)
################################################################################

################################################################################

# dbrestore setup
sr_restore_incomplete_sets_ok = 1
New symbol "sr_restore_incomplete_sets_ok" added to kernel symbol table.
sr_restore_incomplete_sets_ok = 0x27d8870: value = 1 = 0x1
#reboot_restoreDebug=5

iocInit
Starting iocInit
############################################################################
## EPICS R7.0.4
## Rev. R7.0.4-dirty
############################################################################
drvStreamInit: Warning! STREAM_PROTOCOL_PATH not set. Defaults to "."
reboot_restore: entry for file 'auto_positions.sav'
reboot_restore: Found filename 'auto_positions.sav' in restoreFileList.
*** restoring from '/home/epics/support/CARS/iocBoot/ioc13idc/autosave/auto_positions.sav' at initHookState 6 (before record/device init) ***
drvIK320 starting irq logger...
reboot_restore: done with file 'auto_positions.sav'

reboot_restore: entry for file 'auto_settings.sav'
reboot_restore: Found filename 'auto_settings.sav' in restoreFileList.
*** restoring from '/home/epics/support/CARS/iocBoot/ioc13idc/autosave/auto_settings.sav' at initHookState 6 (before record/device init) ***
reboot_restore: done with file 'auto_settings.sav'

Error (511,511) PV: 13IDC::TIMEZONE devStringinEnvVar (init_record) Illegal INP parm field

reboot_restore: entry for file 'auto_settings.sav'
reboot_restore: Found filename 'auto_settings.sav' in restoreFileList.
*** restoring from '/home/epics/support/CARS/iocBoot/ioc13idc/autosave/auto_settings.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'auto_settings.sav'

discoverInterfaces(): unable to fetch network interface configuration
2020-06-03T23:19:10.507 Failed to introspect interfaces or no network interfaces available.
2020-06-03T23:19:10.507 No client broadcast addresses found or specified - empty address list!
osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
Warning: RSRV has empty beacon address list
iocRun: All initialization complete
discoverInterfaces(): unable to fetch network interface configuration
0xbe8d80 (tShell0): Unhandled C++ exception resulted in call to terminate
osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)


osiLocalAddr(): SIOCGIFCONF ioctl failed because "S_errno_ENXIO"





Replies:
Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk

Navigate by Date:
Prev: Re: make runtests fails with "touch: missing file operand" Johnson, Andrew N. via Core-talk
Next: Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
Index: 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  <2020
Navigate by Thread:
Prev: AW: EPICS 7 and VxWorks 6.9 for PPC604? Zimoch Dirk (PSI) via Core-talk
Next: Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
Index: 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  <2020