Next: Specify the target architectures
Up: EPICS Base
Previous: Specify the network domain
Contents
Some RTEMS board support packages support more than one type of network interface.
The pc386 BSP, for example, can be configured to use several different
network interface cards. By default the EPICS network configuration for
the pc386 BSP loads network drivers for all network interfaces which
support run-time probing so if you've got one of these network interfaces you
don't need to make any changes to the EPICS network configuration.
If not, see the comments in
src/RTEMS/base/rtems_netconfig.c
for instructions on selecting a network interface card when building your
EPICS application.
Most RTEMS board support packages support only a single network interface and
need no changes to rtems_netconfig.c.
Eric Norum
[email protected]
Mon Oct 19 11:30:39 CDT 2009