Experimental Physics and Industrial Control System
I have been using the ACS step-pac stepper motor drives with high
current, low voltage SLO-SYN motors and found that I am not getting
the expected torque. In partucular with a 6Amp/phase MO93-FD11 where
I should be getting around 450 oz-in I seem to be only getting around
100 oz-in (torque measurements are very very approximate!). Has anyone
else had similar problems, or any ideas as to what may be happening?
Larry
--
==================================================================
Laurence Lurio
APS/ANL
Sector Number 8
Building 400 VOICE: 630-252-0281
9700 South Cass Avenue FAX: 630-252-0282
Argonne, IL 60439-1749 EMAIL: [email protected]
==================================================================
- Navigate by Date:
- Prev:
EDD/DM: Passing multiple arguments for color rule definition ? Marian ZUREK
- Next:
Re: EDD/DM: Passing multiple arguments for color rule definition ? Deb Kerstiens
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: EDD/DM: Passing multiple arguments for color rule definition ? Deb Kerstiens
- Next:
Re: EDD/DM: Passing multiple arguments for color rule definition ? Anna M. Estes
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024