EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: PB with the archiver
From: Frederic MICHAUD <[email protected]>
To: EPICS talk <[email protected]>
Cc: [email protected]
Date: Thu, 02 Oct 1997 17:52:42 +0200
Hi,

I have another difficulty with the archiver. I would know how to start
the AR with all the 'reqFiles' opened.
I red in the EPICS archiving reference manual that it is possible to
define a configuration file where there's the command REQ wich cause
'reqFile' to be opened at startup.
So my problem is where could I use such a configuration file and how
could I make it executed.

Regards,
			Fred
-- 
_________________________________________________
Frederic MICHAUD
CERN	 : CH-1211 Geneve 23 - Switzerland
Division : ECP-CO 
phone    : (+41) 22 767 65 54 
		        33 59	
E-mail   : [email protected] 
_________________________________________________

Navigate by Date:
Prev: Re: Slow connections on a Solaris Machine Dave Wade
Next: RE: EPICs on PC Jeff Hill
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Slow connections on a Solaris Machine Dave Wade
Next: Re: PB with the archiver Maren Purves
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024