Xy530 and EPICS_3.13.0b11

["Garrett D. Rinehart" <rinehart@aps.anl.gov>]

Any of you kind folks out there have a version of the Xy530 stuff that works with 
3.13.0b11? The one I got from Matthew Needes in '97 quit working just as soon as 
I got my iocs to boot under 3.13.0b11. The present driver was working fine under 
3.12.1 (yes, laugh if you must, I'm jumping from 3.12.1 to 3.13.0b11)

By the way, there are no error messages loading the database records calling for 
DTYP Xy530 and there are no error messages when xy530Configure is called at boot 
up. Indeed, the driver thinks it's working because it complains if 
xy530Configure is called a second time for the same board. However, the "FAIL" 
lights never go off and the boards remain "dead".

Startup is rapidly approaching... all help will be very much appreciated!

Thanks as always.

-- Garrett Rinehart
   Intense Pulsed Neutron Source
   Argonne National Laboratory