Experimental Physics and Industrial Control System
Dear colleague,
I had put two VME CPUs in one crate, one 147 and one 167. I am running a
VME canbus program inthe 167 and some Wavetek RS232 connections program in
147. Each one works perfectly when they are alone.
But whenI put them together, aftre the canbus program finish loading, the
Wavetek program will be interruptted by the message like this:
logTask: 144 log messages lost.
interrupt: drvAb: Interrupt but fl_lock not locked
logTask: 1 log messages lost.
interrupt: drvAb: Interrupt but fl_lock not locked
logTask: 44 log messages lost.
interrupt: drvAb: Interrupt but fl_lock not locked
logTask: 105 log messages lost.
Ihave played alot with switching around the Master and slave jumper, the
sysIntEnable function bu t no luck yet.
Somehow, Ihave a feeling that the canbus program is sending out the
interrupt messages to allthe VME crates that are in the dessy chain to
read all the information like temperature, fan speed and control the
power, etc.But the CPU that is sending out these messages isn't affected
by these messages. I don't know if my understanding is in the wrong way or
not.
Hope someone can help me in this case.
Best,
Jie Lin
Creigton University Office,
Building 902B, POBox 5000,
BNL,
Upton, NY 11973-5000
- Replies:
- Re: Interrupt message Marty Kraimer
- Navigate by Date:
- Prev:
FWD: allen-bradley 1747 question luchini
- Next:
Re: database race condition? Marty Kraimer
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
FWD: allen-bradley 1747 question luchini
- Next:
Re: Interrupt message Marty Kraimer
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024