Experimental Physics and Industrial Control System
>>We use it routinely. I don't understand the problem well enough to comment.
>>What version of EPICS and of the scan record are you using? Does the scan
>>record succeed in causing the motor to move? Does the record not collect
>>position data, or is the problem that a client can't get the data out of the
>>record?
>>
>>
>>Tim Mooney ([email protected]) (630)252-5417
>>Beamline Controls & Data Acquisition Group
>>Advanced Photon Source, Argonne National Lab
>>
I am using EPICS R3.13.1. The scan record does indeed succeed in causing the
motor to move to desired postions. I am also using the scan record to collect
"detector" data at each position. I am able to extract the detector data
array using MEDM
without a problem but the positioner data array always reads zeros although the
position is changing both visibly and also in Motor record position values
in MEDM.
Mark Ryan
Bates Linear Accerlator
MIT '99 B.S./M.Eng
- Navigate by Date:
- Prev:
Re: Scan Record Tim Mooney
- Next:
Re: database race condition? Till Straumann
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Scan Record Tim Mooney
- Next:
Re: Scan Record Tim Mooney
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024