| 1994 1995 1996 1997 1998 1999 <2000> 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 <2000> 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Newport 850f motor control |
| From: | "Ronald L. Sluiter" <[email protected]> |
| To: | "Leonard J. Reder" <[email protected]> |
| Cc: | EPICS Tech-Talk <[email protected]> |
| Date: | Tue, 15 Aug 2000 11:06:26 -0500 |
"Leonard J. Reder" wrote: > > I looked into Galil VME controller boards but it only will > control 4 motors. Nominally we need a solution that can > control 8 or more motors per VME board. And the VME board > should be supported via EPICS device support. > The motor record has device support for Oregon Micro Systems VME58-8S, which can provide up to eight axes of DC servo control. The motor record's home page is; http://www.aps.anl.gov/upd/people/sluiter/epics/modules/mechanism/motor/index.html