Experimental Physics and Industrial Control System
Subject: |
Problem building 3.14 application with ipac/CANbus |
From: |
"Rarback, Harvey" <[email protected]> |
To: |
EPICS Techtalk <[email protected]> |
Date: |
Mon, 18 Feb 2002 00:46:41 -0800 |
Folks,
I am trying to build a pure 3.14.0beta1 application. I built the example application successfully and now I am trying to include Andrew Johnson's ipac/CANbus support. My host is solaris-sparc-gnu and my IOC is VxWorks-68040. Here is what I did
- built the ipac module with 3.14base. I had to #include "recGbl.h" from
3.13base in canBus.h, but otherwise the module seems to have built ok.
- listed the module in <top>/configure/RELEASE.
- added these two lines to xxxApp/src/exampleInclude.dbd
include "drvIpac.dbd"
include "devTip810.dbd"
The build fails when linking the example executable with undefined symbols drvTip810 etc. in example_registerRecordDeviceDriver.o
I have experimented with setting LIBOBJS, LIB_OBJS, example_LIBS etc. in xxxApp/src/Makefile, pointing them to ipacLib and tip810Lib, but the build never finds the symbols.
If I don't add the dbd files to exampleInclude.dbd, but just dbLoadDatabase them, then I get errors like
iocInit: driver drvIpac not found
Any help would be greatly appreciated.
--Harvey
- Replies:
- Re: Problem building 3.14 application with ipac/CANbus Marty Kraimer
- Navigate by Date:
- Prev:
URGENT! SPg
- Next:
Re: Problem building 3.14 application with ipac/CANbus Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
URGENT! SPg
- Next:
Re: Problem building 3.14 application with ipac/CANbus Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024