EPICS Industry Pack support under RTEMS available?

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
<== Date ==>		<== Thread ==>

Subject:	Industry Pack support under RTEMS available?
From:	Dorothea Wehler <[email protected]>
To:	EPICS TechTalk <[email protected]>
Date:	Tue, 17 Aug 2004 11:41:07 +0200

Hello,

may I ask once again for drivers: Is someone using carrier boards on VME-systems running RTEMS together with A/D- and D/A-converter Industry Packs? We would like to install Industry Packs with 16bit A/D and D/A converters respectively with a throuput of >=100kHz. We shortlist the IP235 from Acromag, A/Dconverter and the IP-ADC-8401 from Hytec.

We would be grateful, if someone would be able to make the necessary EPICS driver/device support modules available to us.

Kind regards
Dorothea Wehler

---------
Dr. Dorothea Wehler
Cryoelectra GmbH
Linde 72-74
D-42287 Wuppertal
Germany
Tel: +49 202 / 69824-20
Fax: +49 202 / 69824-40

Replies:: Re: Industry Pack support under RTEMS available? Till Straumann

Navigate by Date:: Prev: Re: RTEMSfor MVME5500 Kate Feng; Next: RE: Industry Pack support under RTEMS available? Mark Rivers; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Navigate by Thread:: Prev: EPICS drivers for DAC/ ADC Industry Packs on a PCI carrier board Dorothea Wehler; Next: Re: Industry Pack support under RTEMS available? Till Straumann; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025