DeltaTau PCI Motor Control Boards and Linux

[Wayne.K.Lewis@doi.vic.gov.au]

Hi,

We are looking at using the PCI version of the Delta Tau motor control
boards on the beamlines at the Australian Synchrotron Project. The likely
board at this stage is the Turbo PMAC2 Ultralite PCI. Our standard IOCs are
Linux based PCs, running EPICS 3.14.6.

I was wondering if anyone has done any work on developing EPICS device
support for any of the PCI Delta Tau boards under Linux?

Thanks,

Wayne Lewis
Australian Synchrotron Project
Department of Infrastructure
Level 17, 80 Collins Street
Melbourne   VIC   3000
tel:  +613 9665 9561
fax:  +613 9655 8666
web: www.synchrotron.vic.gov.au
**********************************************************************
Any personal or sensitive information contained in this email and
attachments must be handled in accordance with the Victorian Information
Privacy Act 2000, the Health Records Act 2001 or the Privacy Act 1988
(Commonwealth), as applicable.

This email, including all attachments, is confidential.  If you are not the
intended recipient, you must not disclose, distribute, copy or use the
information contained in this email or attachments.  Any confidentiality or
privilege is not waived or lost because this email has been sent to you in
error.  If you have received it in error, please let us know by reply
email, delete it from your system and destroy any copies.
**********************************************************************