EPICS Re: Driver for XIA PFCU-4 controller

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
<== Date ==>		<== Thread ==>

Subject:	Re: Driver for XIA PFCU-4 controller
From:	David Maden <[email protected]>
To:	[email protected]
Date:	Fri, 17 Nov 2006 08:45:52 +0100

Lewis,

Rather than using the PFCU-4 controller, you might consider an alternative interface method. At the SLS, we are driving several of the XIA PF4 filter units via Hytec 8001 64 channel binary output modules. This saves us the need for NIM crates, and we need the 8001 for other actuators in the beamlines anyway.

Regards, David

-----Original Message----- From: J. Lewis Muir [mailto:[email protected]] Sent: Thursday, November 16, 2006 4:50 PM To: [email protected] Subject: Driver for XIA PFCU-4 controller

I don't see it listed on the EPICS web site's supported hardware list, but has anyone written a driver for the XIA PFCU-4 controller?

http://www.xia.com/PF_products.html#PFCU

Thanks,

-lewis

References:: RE: Driver for XIA PFCU-4 controller Mark Rivers

Navigate by Date:: Prev: RE: Driver for XIA PFCU-4 controller Mark Rivers; Next: RE: Driver for XIA PFCU-4 controller Denison, PN (Peter); Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Navigate by Thread:: Prev: RE: Driver for XIA PFCU-4 controller Mark Rivers; Next: RE: Driver for XIA PFCU-4 controller Denison, PN (Peter); Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025