Re: SIS3302

["Nicholas P. DiMonte" <npd@aps.anl.gov>]

Title: npd_signature

Matthew,

I started to develop this here at the APS for the Short Pulse Xray system. Its quite different than the SIS3300/1 modules, so I had to start from scratch. With you interest in this and a new application here at the APS will give me reason to complete it now.

Nick D.

Pearson, MR (Matthew) wrote:

Hi,

 

At DLS we have a requirement for a high speed ADC combined with MCA capability. One potential candidate is the VME Struck SIS3302, which is a 100MHz 8-channel 16-bit digitizer, complete with FPGA running histogramming firmware.

 

Has anyone had experience with this board yet? Or developed EPICS software for it?

 

Thanks,

Matthew

 

Dr Matthew Pearson

Software Systems Engineer

Diamond Light Source Ltd

Diamond House

Chilton, Didcot

OX11 0DE

Tel: +44 (0)1235 778538

 

 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom

--

---

Nicholas P. DiMonte
Engineering Specialist
Advanced Photon Source,
AES Controls Group
Argonne National Laboratory
(630) 252-8856   npd@aps.anl.gov
www.aps.anl.gov