1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: How to introduce usage of genSub ? |
From: | Tim Mooney <[email protected]> |
To: | haquin <[email protected]> |
Cc: | [email protected] |
Date: | Mon, 21 Jul 2008 08:22:04 -0500 |
You need to add the following line to your .dbd file: include "genSubRecord.dbd" Also you need to add something like the following line to your Makefile: exampleApp_LIBS += genSub
Hi all,
I want to use genSub record but I don't know how to make it available, I use EPICS 3.14.8.
My starting point is the example application obtained with : >makeBaseApp.pl -t exampleApp myGenSubApp >makeBaseApp.pl -i -t exampleBoot myGenSubApp
Here is What I did:
- In the <top>/configure/RELEASE file I have added the location of the gensub module (GENSUB=$(EPICS_BASE)/../modules/soft/gensub)
- then I run the make command in the <top> directory
=> When I inspect the application tree there is nothing related to the genSub, the genSub record is not available in VDCT.
As a first step I would like to do what is done in the example application with the sub record but with a genSub record.
Can someone explain me the procedure to have genSub available ? Regards.
-- Tim Mooney ([email protected]) (630)252-5417 Beamline Controls & Data Acquisition Group Advanced Photon Source, Argonne National Lab.