1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | EDM installation issues edmPvObjects, etc.? |
From: | Carl Schumann <[email protected]> |
To: | [email protected] |
Date: | Fri, 01 Aug 2008 11:44:45 -0500 |
As an example here is what we set at the SNS:I am having problems with the ftp site referenced above. First, I got an access error, then when I tried again I did not get an access error but the directory was empty. I was expecting to find an example edmPvObjects file. Help would be appreciated?
-- EDMPVOBJECTS=$EPICS_EXTENSIONS/ext_pref/edm
-- EDMOBJECTS=$EPICS_EXTENSIONS/ext_pref/edm
-- EDMHELPFILES=$EPICS_EXTENSIONS/src/edm/helpFiles
-- EDMFILES=$EPICS_EXTENSIONS/ext_pref/edm
-- EDMDATAFILES=./:$IOCTOP/<system1>/opi/edl:$IOCTOP/<system2>/opi/edl
Also, we will make available the $EPICS_EXTENSIONS/ext_pref/edm as an example.
This will be tarred up as ext_pref-edm.tar on our ftp site: (ftp://snsftp.sns.ornl.gov/UPLOAD/controls/edm)
Some of the configuration steps may be discussed in the edm documentation located
in the following: $EPICS_EXTENSIONS/src/edm/doc
Thanks, Carl Schumann