Experimental Physics and Industrial Control System
On Mon, 16 Mar 2009, ÍôÆôʤ wrote:
> I am using the hytec8401 and the correponding hy8401ip driver from
> Diamond. The record can be follows:
>
> record(ai,"AI")
> {
> field(DTYP,"Hy8401ip")
> field(INP,"#20S0 @ MEAN=10)
> }
>
> Sometimes i want to change the samples to average. But i do not know how
> to change this field without reboot the ioc? AI.INP looks like can not
> be change in running. By the way i use edm.
I'm afraid you're right. There is no hook from record support to let the
driver know that the INP field has changed, so it's only parsed during
record initialisation. It's not very clear to me how to fix this.
To the list in general:
Is it possible for driver initialisation code to add callback requests
for extra PVs, or is there some other way to discover when a field not
directly supported by record support has changed?
- Replies:
- Re: how to change the MEAN without reboot IOC? Gasper Jansa
- References:
- how to change the MEAN without reboot IOC? 汪启胜
- Navigate by Date:
- Prev:
how to change the MEAN without reboot IOC? 汪启胜
- Next:
Re: how to change the MEAN without reboot IOC? Gasper Jansa
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
how to change the MEAN without reboot IOC? 汪启胜
- Next:
Re: how to change the MEAN without reboot IOC? Gasper Jansa
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024