1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Agilent E8257D Device Support? |
From: | "Gaul, Robert" <[email protected]> |
To: | <[email protected]> |
Date: | Fri, 29 May 2009 15:34:50 -0400 |
Hello, I was wondering if anyone had device drivers directly for
the Agilent E8257D microwave signal generator? If drivers do not exist directly then I figure that you can
connect it via GPIB to a LAN/GPIB gateway (Agilent E5810) and that this gateway
has EPICS device drivers that include asynDriver and StreamDevice. My questions,
if this is the route we have to go, is as follows: -
Does anyone have support written for the 8257D using
the gateway? -
Would StreamDevice be needed? I want to say no because
the 8257 is not RS-232 but I may be wrong in how I look at the architecture of
everything Any help from the community is helpful and I want to thank
everyone in advance! Robert Gaul III Student Assistant NSLS II |