Asyn R4.11

["Szalata, Zenon M." <zms@slac.stanford.edu>]

I have encountered the following error from asyn when I run my soft IOC with asyn R4.11.

2009/08/02 11:00:13.682 CAM:ASYN:IO: EOS TOO LONG

I get this error message each time an io operation is attempted on the GPIB device and the io operation is not performed.  The GPIB device is KS3988 CAMAC crate controller.

This IOC works fine with asyn R4.9.

Has R4.11 become more strict about sloppy programming?
Or do I need to set some asyn parameter, which for some reason either was not needed or did not matter with R4.9?
Anyway, I am not sure what the problem is and how to fix it.  For now I am back with R4.9.

Thanks,
Zen