| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: OMS MAXv driver |
| From: | Dirk Zimoch <[email protected]> |
| To: | Mark Rivers <[email protected]> |
| Cc: | [email protected], [email protected], [email protected] |
| Date: | Fri, 11 Dec 2009 11:00:32 +0100 |
Hi Mark,That's exactly what I am missing for a log time. I planned to do it but never found the time. I did it for the old OMC VME58 and StreamDevice version 1, but that was completely separate from the motor record.
Dirk Mark Rivers wrote:
Folks, I am thinking about implementing coordinated motion on the OMS/Pro-Dex MAXv controller. To do so I think it would first make sense to implement an asynOctet driver for the MAXv, to abstract the string communication. This is what Diamond did for the DeltaTau PMAC series, so that the same higher level software can communicate with PCI, VME and Ethernet based PMACs. My question is whether anyone else has started (or completed!) doing this for the MAXv and/or OMS58? Thanks, Mark
-- Dr. Dirk Zimoch Paul Scherrer Institut, WBGB/006 5232 Villigen PSI, Switzerland Phone +41 56 310 5182