EPICS Re: Support for Omega CN-7500 temperature controller

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: Support for Omega CN-7500 temperature controller
From:	John Dobbins <[email protected]>
To:	"Xu, Huijuan" <[email protected]>
Cc:	"[email protected]" <[email protected]>
Date:	Sat, 26 Jun 2010 12:49:16 -0400

Huijuan,

I have support for a similar device, CN7600, using StreanDevice 2 and Modbus Ascii mode of controller. I added a checksum converter to StreamDevice for this purpose. This support might be easily adapted.

John Dobbins

Lab for Elementary Particle Physics
Cornell University

Xu, Huijuan wrote:

Hello,

We got a lot of Omega CN-7500 temperature controllers that uses Modbus over RS-485. Does anyone have a streamdevice protocol or any other device/driver support for that? Thanks.

Regards,

Huijuan

References:: Support for Omega CN-7500 temperature controller Xu, Huijuan

Navigate by Date:: Prev: Support for Omega CN-7500 temperature controller Xu, Huijuan; Next: error building latest rtems Silver; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Support for Omega CN-7500 temperature controller Xu, Huijuan; Next: error building latest rtems Silver; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024