| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Area Detector |
| From: | "Mark Rivers" <[email protected]> |
| To: | "Szalata, Zenon M." <[email protected]> |
| Cc: | [email protected] |
| Date: | Wed, 11 May 2011 12:12:00 -0500 |
|
I have only seen that error on the color cameras, which don’t
support 16-bits even in mono mode. I will test again on a GC1380H camera, where I know it used
to work fine. Mark From: Szalata, Zenon
M. [mailto:[email protected]] Hi
Mark, We
have a few AVT GX1910 GigE cameras. Area Detector works fine with these
cameras with one exception. Changing
Data Type from Mono8 to Mono16 generates and error: “…
error, status=4, function=7, value=3” followed by “…
13PS1:cam1:DataType devAsynInt32 process error” The
camera support Mono16 and can be put in this mode from GigEViewer program. Is there
anything that I can do to overcome this difficulty? Is
this feature working for other AVT cameras? Many
thanks in advance, Zen |