Re: synApps 5.6 release

[John Hammonds <JPHammonds@anl.gov>]

Just one more data point.  I was able to download the whole thing but I 
am sitting on site at APS.

On 12/6/2011 8:49 AM, Paul Nord wrote:
> Same here.
>
> On Dec 6, 2011, at 8:30 AM, Fabian S. wrote:
>
> > Thx for the update but it seems that downloading the file completely is
> > not possible. It stops after ~35MB with an error 408. I've checked it
> > from different locations as well as different browsers.
> >
> > # wget http://www.aps.anl.gov/bcda/synApps/tar/synApps_5_6.tar.gz
> > Connecting to www.aps.anl.gov (164.54.8.141:80)
> > synApps_5_6.tar.gz    22% |******                         | 34268k
> > 00:10:41 ETA
> > #
> >
> >
> >
> >
> > Tim Mooney wrote:
> > > Dear folks,
> > >
> > > synApps 5.6 is now available on our web site, http://www.aps.anl.gov/bcda/synApps/
> > > This version was tested mostly with EPICS 3.14.12.1.  Note that the build is
> > > configured differently than in previous releases, with architecture-specific
> > > paths to EPICS-base and synApps-support directories, and with new dependences
> > > on tools (notably msi 1.5) and system resources.
> > >
> > > Here are top-level docs:
> > > http://www.aps.anl.gov/bcda/synApps/synApps_5_6.html
> > >
> > > Here are collected module-specific docs:
> > > http://www.aps.anl.gov/bcda/synApps/synApps_docs_all.html

--
John Hammonds
Software Services Group
APS Engineering Support Division

Argonne National Laboratory
JPHammonds@anl.gov<mailto:JPHammonds@anl.gov>
(630)252-5317