1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Can not access PVs in python script |
From: | sahil jee <[email protected]> |
To: | "Mooney, Tim M." <[email protected]> |
Cc: | "[email protected]" <[email protected]> |
Date: | Mon, 19 Aug 2013 01:07:08 +0300 |
Dear Mooney
Thank you for your reply.
Fortunately, The previous error (i.e. "readvoltage" not defined?) has gone but I am getting another error now.
As highlighted in the following.
My code is as follows.
###########################################################
from org.csstudio.opibuilder.scriptUtil import PVUtil
value1 = PVUtil.getDouble("readvoltage")
....
.....
TypeError: getDouble(): 1st arg can't be coerced to org.csstudio.utility.pv.PV
I put the PV in inverted commas as mentioned by you, which has eleminated the previous error
but now it gives me the above error.
Should I include some extra libraries etc ??
Looking forward for the solution.
Thank you.
See ifPVUtil.getDouble("readvoltage")works.
Tim
From: [email protected] [[email protected]] on behalf of sahil jee [[email protected]]
Sent: Saturday, August 17, 2013 4:25 PM
To: [email protected]
Subject: CSS: Can not access PVs in python script
Dear community
I am trying to acess PVs of my ioc. My ioc(stream device) is running properly and containing "readvoltage" and "readcurrent", "calculatedpower" as PVs.
In my CSS application, I want to access the above two mentioned PVs in order to make some calculations.
I am trying python embedded script as follows;
voltage = PVUtil.getDouble(readvoltage) # readvoltage and readcurrent are PVs in my ioccurrent=PVUtil.getDouble(readcurrent)power = valtage*current
calculatedpower.setValue(power) # calculatedpower is a PV in my ioc
When I run my opi it gives me the error;
"readvoltage" not defined?
In my opi, I have two text input widget which are receiving readvoltage PV value and readcurrent PV value, and one Text Update widget which will receive the calculatedpower PV value.
Looking for your kind reply.
Thank you all.