| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | procServ and sseq |
| From: | Pierrick Hanlet <[email protected]> |
| To: | Tech Talk <[email protected]> |
| Date: | Sat, 28 Sep 2013 11:23:23 +0100 |
|
Hi, I have several soft IOCs running on different ports on a linux PC and several IOCs running on VME crates. I'm using 3.14.11 and SL5.4. When running one soft IOC from a command line, I can run sequences that set values in the VME IOCs. However, when I've started the IOC from procServ, my sequences fail to change the values of the PVs in the VME IOCs. I did try the trick of using a pre_st.cmd file to ensure that EPICS_CA_ADDR_LIST is properly defined. I cannot find this problem in the archives. Any help would be greatly appreciated. Thanks, Pierrick --
"Whether you think you can or think you can't, either way, you are correct" -- Henry Ford _______________________________________________________________ Pierrick Hanlet IIT/Fermilab +44-(0)1235-44-5550 (RAL) +1-630-840-5555 (FNAL) +1-312-567-5745 (IIT) +1-630-697-8758/+44-(0)79-48-860-197 (US/UK mobile) |