1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Error database DTYP |
From: | "Antonio Borondo" <[email protected]> |
To: | <[email protected]> |
Cc: | [email protected] |
Date: | Mon, 25 Nov 2013 11:46:43 +0100 |
Hi all, I am trying to deploy an EPICS network between a linux PC, a MicroBox with OPC Server and a Siemens PLC. The MicroBox basically gets the registers from the PLC, stores them into OPC Server database and after puts them into EPICS database using OpcIocShell. On the linux PC side I have developed the EPICS IOC which loads the same data base. My problem comes when I start my IOC and I get the next error message for each PV of the data base: Can't set "<PV NAME>.DTYP" to "opc" Error at or before ")" in path "." file "opc.db" line x" Any ideas about how to resolve it? Thank you very much, Antonio Borondo |