Fw: Alarm Handler

[Swati Soni2 <swati.soni2@tcs.com>]

Thanks a lot Robert!!!

I started using latest version i.e.
33....everything has resolved but on compiling got only one error:


make -C O.linux-x86_64 -f ../Makefile TOP=../../.. T_A=linux-x86_64 install
make[1]: Entering directory `/home/epics/base-3.14.12.3/extensions/src/O.linux-x86_64'
make[1]: *** No rule to make target `../../../lib/linux-x86_64/libXmu.a',
needed by `alh'.  Stop.
make[1]: Leaving directory `/home/epics/base-3.14.12.3/extensions/src/O.linux-x86_64'
make: *** [install.linux-x86_64] Error 2

Thanks & Regards
Swati Soni

From:	Robert Soliday <soliday@anl.gov>
To:	<tech-talk@aps.anl.gov>
Date:	11/27/2013 09:18 PM
Subject:	Re: Fw: Alarm Handler
Sent by:	tech-talk-bounces@aps.anl.gov

---

That error was removed back in 2009. You are using a very
old version of the alarm handler. 

../force.c:1028:21: error: ‘YES’ undeclared (first use in this function)
  pforcePV->disabled=YES; 

This can be changed to:
pforcePV->disabled=1;

Everything else just looks like warnings.

--Bob Soliday


On 11/27/13 06:08, Swati Soni2 wrote:

---

As suggested, I have installed motif...but again on compiling it shows
this error: 


../alLog.c: In function ‘filePrintf’: 
../alLog.c:440:7: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
   int status; 
       ^ 
../awAlh.c: In function ‘startDrag’: 
../awAlh.c:472:5: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
 int status, n; 
     ^ 
../awAlh.c: In function ‘drag’: 
../awAlh.c:511:5: warning: variable ‘stat’ set but not used [-Wunused-but-set-variable]
 int stat; 
     ^ 
../awView.c: In function ‘singleClickArrowGroupW_callback’:
../awView.c:297:21: warning: variable ‘treeWindow’ set but not used [-Wunused-but-set-variable]
  struct subWindow  *treeWindow; 
                    
^ 
../axSubW.c: In function ‘exposeResizeCallback’:
../axSubW.c:396:12: warning: variable ‘oldViewHeight’ set but not used
[-Wunused-but-set-variable] 
  Dimension oldViewHeight; 
            ^ 
../browser.c: In function ‘callBrowser’: 
../browser.c:71:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
  int status; 
      ^ 
../current.c: In function ‘currentAlarmHistoryWindow’:
../current.c:53:21: warning: variable ‘title’ set but not used [-Wunused-but-set-variable]
  Widget popup_shell,title,button; 
                    
^ 
../dialog.c: In function ‘errMsg’: 
../dialog.c:277:12: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
     size_t len; 
            ^ 
../force.c: In function ‘alForcePVSetNotConnected’:
../force.c:985:19: warning: variable ‘pcalc’ set but not used [-Wunused-but-set-variable]
     FORCEPV_CALC* pcalc; 
                   ^
../force.c: In function ‘forcePVUpdateFields’: 
../force.c:1028:21: error: ‘YES’ undeclared (first use in this function)
  pforcePV->disabled=YES; 
                    
^ 
../force.c:1028:21: note: each undeclared identifier is reported only once
for each function it appears in 
make[1]: *** [force.o] Error 1 
make: *** [install.linux-x86_64] Error 2 


Thanks & Regards
Swati Soni

From:	Pierrick Hanlet <hanlet@fnal.gov>
To:	Swati Soni2 <swati.soni2@tcs.com>
Date:	11/27/2013 04:46 PM
Subject:	Re: Alarm Handler

---

Hi Swati,
You may end up with several of these errors.  Your best bet to is
use yum to pick up the
appropriate libraries to which you will need to link.  You will need
the "devel" versions
so that you pick up the header files ".h".  For this header
file, you will need openmotif.

As an example:
> yum list "*motif*"
will list what you have installed and what there is in the repositories
to install
You should see openmotif-devel.i686 which is not installed.

> yum install openmotif-devel
This should take care of the first header file error.
Pierrick


On 11/27/2013 10:50 AM, Swati Soni2 wrote: 
Thanks Janet.. 
But I was using alh_1_24 for Alarm handler for base 3.14.12.3.

I had created extension directory into which I copied the content of alh_1_24
and renamed it as src as described in http://www.aps.anl.gov/epics/extensions/config/index.php

When I compiled it (by make on src), it got terminated ...fatal error:
Xm/Xm.h :No such File or directory 


Thanks & Regards
Swati Soni

From:	"Anderson, Janet B." <jba@aps.anl.gov>
To:	Swati Soni2 <swati.soni2@tcs.com>, "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date:	11/26/2013 08:57 PM
Subject:	RE: Alarm Handler

---

The optional ALARMHANDLER
environment variable should specify the directory where your Alarm Handler
input configuration files reside and where the Alarm Handler output log
files should be written.  The PATH  environment
variable should include the directory of the alarm handler executable.

Janet

---

From: tech-talk-bounces@aps.anl.gov
[tech-talk-bounces@aps.anl.gov]
on behalf of Swati Soni2 [swati.soni2@tcs.com]
Sent: Tuesday, November 26, 2013 6:04 AM
To: tech-talk@aps.anl.gov
Subject: Fw: Alarm Handler

---

Hi 

I am using EPICS 3.14.12.3 on fedora..I want to install Alarm handler extension.
Can anyone tell me how to set environment ?

I had used      
        setenv ALARMHANDLER
/<path name of alh1_3_31> 
Bt it throws error commnad not found....Is there any other command to get
it installed?? 

I am following http://www.aps.anl.gov/epics/EpicsDocumentation/ExtensionsManuals/AlarmHandler/alhUserGuide-1.2.33/ALHUserGuide.html

Thanks & Regards
Swati Soni

=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain 
confidential or privileged information. If you are 
not the intended recipient, any dissemination, use, 
review, distribution, printing or copying of the 
information contained in this e-mail message 
and/or attachments to it are strictly prohibited. If 
you have received this communication in error, 
please notify us by reply e-mail or telephone and 
immediately and permanently delete the message 
and any attachments. Thank you 


-- 
"Whether you think you can or think you can't, either way, you are
correct" -- Henry Ford
_______________________________________________________________
Pierrick Hanlet
IIT/Fermilab
+44-(0)1235-44-5550 (RAL) 
+1-630-840-5555 (FNAL)
+1-312-567-5745 (IIT)
+1-630-697-8758/+44-(0)79-48-860-197 (US/UK mobile)