Experimental Physics and Industrial Control System
Hi Zhou Ping,
I was not aware of this problem. I will test it today and see if I can reproduce it and find a solution.
Mark
________________________________
From: [email protected] [[email protected]] on behalf of 周平 [[email protected]]
Sent: Wednesday, April 09, 2014 2:38 AM
To: tech-talk
Subject: How to stop acquire in DblCorrelation Mode for MarCCD in AreaDetector module
Hi All,
The detector of our beamline is MarCCD and the type is SX165. It worked in areaDetectorR1-9-1 Module correctly. The parameters were as follows:
ADFrameType = DblCorrelation;
ADImageMode = Single;
marCCDStability = 0;
marCCDOverlap = Sequential;
In this condition, I found it can't stop acquire completely when it was acquiring. It can only stop front half acquire time and the back time can't stopped. For example, if I set the acquire time = 100s, then I clicked the start button to start acquire. If I want to stop acquire when it had acquired 20s for front half the nominal acquisition time, I clicked the stop button to stop it. And then I found it still acquired in the next half the nominal acquisition time which was 50s. It couldn't be stopped completely!
If I set ADFrameType to Normal, it could be stopped quickly. But the background noise was too large in this mode so I set ADFrameType to DblCorrelation for use.
Is there a way to solve this problem?
Thanks!
With best regards,
------------------
Zhou Ping
SAXS Beamline, SINAP, Chinese Academy of Sciences
Address:239 ZhangHeng Road,Pudong District,Shanghai,201203,P.R.China
Tel:86-21-33932019 Mobile: 86-18116357596
Email:[email protected]
- Replies:
- RE: How to stop acquire in DblCorrelation Mode for MarCCD in AreaDetector module Mark Rivers
- References:
- How to stop acquire in DblCorrelation Mode for MarCCD in AreaDetector module =?gb18030?b?1tzGvQ==?=
- Navigate by Date:
- Prev:
How to stop acquire in DblCorrelation Mode for MarCCD in AreaDetector module =?gb18030?b?1tzGvQ==?=
- Next:
EDM - where to find widget "Variable Scale Bar" Joachim Rahn
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
How to stop acquire in DblCorrelation Mode for MarCCD in AreaDetector module =?gb18030?b?1tzGvQ==?=
- Next:
RE: How to stop acquire in DblCorrelation Mode for MarCCD in AreaDetector module Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024