Hi,
Recently I want to set up a TCP server and make it to a virtual device by using EPICS. The example testIPServerApp runs normally which doesnot use the devicesupport, but when I use the drvAsynIPServerPortConfigure and start the IOC, I have the problems as followed.
## Register all support components
dbLoadDatabase "dbd/AB300.dbd"
AB300_registerRecordDeviceDriver pdbbase
## Load record instances
#dbLoadRecords("db/xxx.db","user=yuHost")
dbLoadRecords("db/devAB300.db","P=AB300,R=,L=0,A=0")
drvAsynIPServerPortConfigure("L0","10.40.18.201:5200",2,0,0,0)
cd /home/yu/ioc/ab300/iocBoot/iocAB300
iocInit
Starting iocInit
############################################################################
## EPICS R3.14.12.2 $Date: Mon 2011-12-12 14:09:32 -0600$
## EPICS Base built Aug 10 2014
############################################################################
2015/05/07 13:59:52.336 L0 devGpib registerSrqHandler failed asynManager:getInterruptPvt Driver does not support interrupts on interface asynInt32
iocRun: All initialization complete
## Start any sequence programs
#seq sncxxx,"user=yuHost"
epics>
The server can't set up normally, and the communication is failed. I don't understand what these words mean "L0 devGpib registerSrqHandler failed asynManager:getInterruptPvt Driver does not support interrupts on interface asynInt32".
I wonder someone who can help me to sovle the problem. Thanks so much!
Best regards!