1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Galil Motor Tutorial? |
From: | Eric Norum <[email protected]> |
To: | EPICS tech-talk <[email protected]> |
Date: | Wed, 13 Jan 2016 10:37:48 -0800 |
A project here has purchased some Galil motors to run some high-power RF attenuators and phase shifters. The information I’ve been given on the controller configuration is:
I have downloaded the support module from http://motorapp.github.io/Galil-3-0/ and built it. But when I had a look at the example application provided therein my reaction was “egad”. Trajectories, coordinated motion, and even multiple IP addresses in the startup script. But not even a README AFAICT. The application is pretty simple — a handful of individual motor records would be fine. Can someone out there in EPICS-land point me in the direction of a simpler example or at least some hints on how this controller is to be used? Thanks,
|