1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Danfysik 8500 or 9100 power supply driver |
From: | Jack <[email protected]> |
To: | [email protected] |
Cc: | [email protected] |
Date: | Fri, 29 Jan 2016 09:49:59 +0100 |
Hi Ken,we have modified the original driver of Danfisyc 8000 power supply, we can share the work.
Thanks, -Mauro On 1/28/2016 9:57 PM, Lewis, Wayne wrote:
Hi Ken, We have EPICS support for the Danfysik 892 power supplies here at NSLS-II. If that's also the same command set, I can send you the details. Wayne On Thu, Jan 28, 2016 at 07:41:08PM +0000, Schrock, Ken wrote:Hello, We are purchasing several Danfysik model 9100 power supplies for FRIB at MSU. Before developing a new EPICS driver, we are curious if any users already have one for either the 8500 or 9100? Danfysik told us that the command set is the same for both models. Regards, Ken Schrock Electrical Staff Engineer Facility for Rare Isotope Beams Michigan State University 640 South Shaw Lane East Lansing, MI 48824, USA Tel. 517-908-7193 Email: [email protected]<mailto:[email protected]> [cid:[email protected]]
-- ________________________________________________________________________ Mauro Giacchini Control Systems Specialist INFN Laboratori Nazionali di Legnaro Viale Università 2 I 35020 Legnaro (Padova) Tel. +39 049 8068 558 Fax 558 EPICS _at_ LNL http://www.lnl.infn.it/~epics/ ...the first EPICS installation to the project SPES realized from the scratch in ITALY is in production since begin 2010!! ________________________________________________________________________ --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus