RE: modbus TCP command not found

[Mark Rivers <rivers@cars.uchicago.edu>]

Anne,

Hopefully you will receive this message via tech-talk because when I tried to send to your e-mail address it was blocked by the Argonne security:

****************************
honeypot-prod0.anl.gov rejected your message to the following e-mail addresses:
Anne M. (anne@sevensols.com)
honeypot-prod0.anl.gov gave this error:
<carsmail2.cars.aps.anl.gov[164.54.162.47]>: Client host rejected: Destination domain blacklisted. Contact cyber@anl.gov for details. 
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
****************************

If you think your domain should not be blocked we can ask Argonne to look into this.

Mark


________________________________________
From: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] on behalf of Mark Rivers [rivers@cars.uchicago.edu]
Sent: Friday, April 08, 2016 7:18 AM
To: Anne M.; tech-talk@aps.anl.gov
Subject: RE: modbus TCP command not found

I just tried it and it worked OK for me.

I think you may just be running it incorrectly.  Here is how to do it:

cd to modbus/iocBoot/iocTest.

type this command:

../../bin/linux-x86/modbusApp sim3.cmd

That should work, the testModbusSyncIOConfigure should be recognized at that point.

You may get a number of error messages like this if you don't have a Modbus device or simulator that it can connect to.

2016/04/08 07:16:29.631 drvModbusAsyn::doModbusIO port A0_Out_Word error calling writeRead, error=asynManager::queueLockPort queueRequest failed: port sim1 not connected, nwrite=0/6, nread=0


Mark

________________________________
From: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] on behalf of Anne M. [anne@sevensols.com]
Sent: Friday, April 08, 2016 6:21 AM
To: tech-talk@aps.anl.gov
Subject: modbus TCP command not found

Hello!

I am having some problems with my epics program...

I am currently working with modbus TCP (https://github.com/epics-modules/modbus/), so when trying to run the modbus example I get the following error:

"sim3.cmd line 40: Command testModbusSyncIOConfigure not found."

- To try yourself: What I am doing is that with the bin generated with the makefile avaliable at "/modbus/bin/linux-x86/modbusApp" I run sim3.cdm avaliable "/modbus/iocBoot/sim3.cmd", like:

$ ./modbusApp sim3.cmd

- What I think it is happening: at the source files "/modbus/modbusApp/src" there is a CC program that is the test I want to try. In testModbusSyncIO.cpp the function is defined so later sim3.cmd calls it with its arguments. This is what I want to do in my program, I just cant make the example to work.

Can someone help me? :)

--

[https://docs.google.com/uc?export=download&id=0B-JomN4-F_XybUpRdEU2cmFtMFk&revid=0B-JomN4-F_XybWFHMEcrd3llaHc5Zm0yN0dNZk1SdytxbktnPQ]<http://sevensols.com/>

Anne M. Munoz Perez
Software Development / Engineering
anne@sevensols.com<mailto:anne@sevensols.com>

[https://docs.google.com/uc?export=download&id=0B-JomN4-F_XyUFVsMEQ2UGlybjg&revid=0B-JomN4-F_XyVzE2ZXZPdi9NM1pnRDdEMHZSUXRqK2k0dU80PQ]<http://es.linkedin.com/in/anne-munoz-3118b79b> [https://docs.google.com/uc?export=download&id=0B-JomN4-F_XyZGc3STRVM2w2N28&revid=0B-JomN4-F_XydHMzQTkybWxOclZxVmF4ZWZNbmx0NEJXVWEwPQ] <http://twitter.com/petramika>