1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Access TIME field of a PV |
From: | "Southern, Tim" <[email protected]> |
To: | [email protected] |
Date: | Wed, 15 Jun 2016 18:03:54 -0400 |
You will need to run a soft IOC to generate timestamp PVs. Here is a sample db record that will perform the desired task. record(stringin, "${PV}:T") { field(DTYP, "Soft Timestamp") field(TSEL, "${PV}.TIME CP") field(INP, "@%b %d %Y %H:%M:%S") } Where ${PV} is the record you wish to monitor for update time. Cheers, Tim Southern [email protected] On 6/15/16 10:32 AM, Mark Rivers wrote:
There is device support in EPICS base for a stringin record to display the timestamp of a record. Look at this tech-talk note: http://www.aps.anl.gov/epics/tech-talk/2006/msg00017.php<http://www.aps.anl.gov/epics/tech-talk/2006/msg00017.php> Mark ________________________________ From: [email protected] [[email protected]] on behalf of Elmer Pensack [[email protected]] Sent: Wednesday, June 15, 2016 9:06 AM To: [email protected] Subject: Access TIME field of a PV Hello, I have a MEDM display with several text message PVs. The users want to know when the PVs last updated because they don’t update frequently, I thought it would be easy - I’d just display the TIME field next to the message, only to find that TIME is not accessible. So is there an easy way to display the last update time? I was hoping not to need to write code to do it. Thanks for any suggestions. Elmer Pensack