1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: HOW to start working with EPICS |
From: | "Jemian, Pete R." <[email protected]> |
To: | "[email protected]" <[email protected]>, Paramveer Jain <[email protected]>, "[email protected]" <[email protected]> |
Date: | Tue, 30 Aug 2016 09:40:20 +0000 |
This document
http://prjemian.github.io/epicspi
Install EPICS on the Raspberry Pi
will get you started to build an EPICS system with the synApps software tool suite. While it was written a few years ago (and is due for an update since things change over time), it describes the necessary steps.
Pete
Sent from a device with a dreadfully small screen
-------- Original message -------- From: [email protected] Date: 8/30/2016 1:49 AM (GMT-06:00) To: Paramveer Jain <[email protected]>, [email protected] Subject: AW: HOW to start working with EPICS
If you want to work with Raspberry Pi or BeagleBone Black and Linux-os I can help you to install EPICS. If you want to use the I2C interface I recommend the BeagleBone Black.
Raul
actually i m an intern in RRCAT .
I have not given any option for interface but if I will, I will choose raspberryOn Tue, Aug 30, 2016 at 2:15 AM, <[email protected]> wrote:
|