1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Danfysik 8500 or 9100 power supply driver |
From: | Jeong Han Lee <[email protected]> |
To: | "Priller, John" <[email protected]>, "[email protected]" <[email protected]> |
Date: | Mon, 26 Sep 2016 14:37:51 +0200 |
Hi John,Could you send FRIB files to me? I will put them in a github repository to share others if you are OK.
If FRIB has the git repository which I can fork, it is much better to work for me.
Thanks, Han On 09/26/2016 12:47 PM, Priller, John wrote:
We developed and tested some asyn/stream support for the Danfysik 9100 at NSCL/FRIB. It's not a full-blown IOC but just a stream protocol file and a database template to go with it. But if anyone wants to use those as a starting point I can send them the files. On 9/26/2016 4:41 AM, Jeong Han Lee wrote:Hi, One of ESS system also may use a Danfysik System 8500, so I am interested in to see that any existent EPICS IOC available. If anyone has it, please let me know. Thanks, Han On 01/28/2016 08:41 PM, Schrock, Ken wrote:Hello, We are purchasing several Danfysik model 9100 power supplies for FRIB at MSU. Before developing a new EPICS driver, we are curious if any users already have one for either the 8500 or 9100? Danfysik told us that the command set is the same for both models. Regards, *Ken Schrock* Electrical Staff Engineer Facility for Rare Isotope Beams Michigan State University 640 South Shaw Lane East Lansing, MI 48824, USA Tel. 517-908-7193 Email: [email protected] <mailto:[email protected]> *cid:[email protected]* * *