1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: StreamDevice fails to compile for RTEMS targets. |
From: | "Mooney, Tim M." <[email protected]> |
To: | "Rivers, Mark L." <[email protected]>, "'Michael Westfall'" <[email protected]>, "[email protected] Talk" <[email protected]> |
Date: | Thu, 6 Oct 2016 17:30:33 +0000 |
You don't have to build sscan if you don't need the swait record. (You probably don't. The calcout record is better.) If you don't have the sscan module, you must comment out the
line that defines SSCAN, eg.
SSCAN=$(SUPPORT)/sscan-2-10-2 in calc/configure/RELEASE. Tim Mooney ([email protected]) (630)252-5417
Beamline Controls Group (www.aps.anl.gov) Advanced Photon Source, Argonne National Lab From: [email protected] [[email protected]] on behalf of Mark Rivers [[email protected]]
Sent: Thursday, October 06, 2016 12:24 PM To: 'Michael Westfall'; [email protected] Talk Subject: RE: StreamDevice fails to compile for RTEMS targets. Hi Mike,
That error is not in StreamDevice, it is in calc. calc depends on sscan, so you must install and build sscan before you build calc.
Mark
From: [email protected] [mailto:[email protected]]
On Behalf Of Michael Westfall
StreamDevice 2.6 fails to compile for RTEMS targets. The problem seems to be with the example IOC in src/StreamDeviceApp/streamApp. We get errors like these: /home/mikew/epics/support/calc/lib/RTEMS-beatnik/libcalc.a(swaitRecord.o): In function `special': etc.... However, if I set the build to avoid cross compile targets, it builds OK for the Linux host. Also it builds OK even for RTEMS targets if I comment out CALC=.... in .../configure/RELEASE. Wondering if anyone else has run across this and what the solution might be..
Mike Westfall Control Systems Software Engineer
|