1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: StreamDevice: Timeout after reading 27 bytes |
From: | Ralph Lange via Tech-talk <tech-talk at aps.anl.gov> |
To: | EPICS Tech Talk <tech-talk at aps.anl.gov> |
Date: | Mon, 11 May 2020 12:27:45 +0200 |
Dear all,
I wrote a power control IOC. The function of the power supply is realized, but when I start the IOC, it appears in cycles “Timeout after reading 27 bytes…”,eg:
(base) [root@localhost iocelexample]# ./pulse_el.cmd
#!../../bin/linux-x86_64/elexample
< envPaths
epicsEnvSet("ARCH","linux-x86_64")
epicsEnvSet("IOC","iocelexample")
epicsEnvSet("TOP","/home/EPICS/elCtrl")
epicsEnvSet("EPICS_BASE","/home/EPICS/base-3.14.12")
epicsEnvSet("ASYN","/home/EPICS/app/asyn4-17")
epicsEnvSet("STREAM","/home/EPICS/app/stream")
[...]