1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: asyn TracMask + asynMotor : function= |
From: | "Pearson, Matthew R. via Tech-talk" <tech-talk at aps.anl.gov> |
To: | John Dobbins <john.dobbins at cornell.edu> |
Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Mon, 27 Jul 2020 19:47:21 +0000 |
Hi John, If you enter ‘asynReport, 10’ on the IOC shell it will printout all the parameter names (as well as all the parameter lists), eg: Parameter 175 type=asynInt32, name=CONTROLLER_SSICAPABLE, value=0, status=0 Cheers, Matt From: Tech-talk <tech-talk-bounces at aps.anl.gov>
On Behalf Of John Dobbins via Tech-talk All, I am learning to use the EPICS support for the Galil motor controller. When I use asynSetTraceMask("myAsynPort",0,8) I get output like this: 2020/07/27 14:59:23.327 asynMotorController:writeInt32:: axis=0, function=175, value=1 in the source code
But I don't see how to go from function=175 to the parameter defined in the source header so that this message will mean something to me. Thanks, John Dobbins Research Support Specialist Cornell High Energy Synchrotron Source Cornell University
Maybe it's all part of a great big ineffable plan. - Neil Gaiman, _Good Omens_
|