1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Lucid Vision Cameras |
From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
To: | "'Engbretson, Mark S.'" <engbretson at anl.gov>, John Dobbins <john.dobbins at cornell.edu> |
Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Fri, 31 Jul 2020 19:49:16 +0000 |
Hi John, It should work with ADAravis. It won’t work with ADVimba or ADSpinnaker, because those only work with cameras from AVT and FLIR respectively. Mark From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of
Engbretson, Mark S. via Tech-talk Chances are that it already is support by either the ADAravis or ADVimbra which both derive from ADGenicam. Mark Rivers did his normal excellent work on GenICam supported hardware. From: Tech-talk <tech-talk-bounces at aps.anl.gov>
On Behalf Of John Dobbins via Tech-talk Someone here purchased some GigE cameras from Lucid Vision. Their Phoenix line. They say GenICam on the web-site. Am I correct in understanding they would require a new driver based on the areaDetector
GenICam driver? Should I tell them to buy a different camera? John Dobbins Research Support Specialist Cornell High Energy Synchrotron Source Cornell University
Maybe it's all part of a great big ineffable plan. - Neil Gaiman, _Good Omens_
|