Re: Device Support for Siemens PLC with profinet

[Florian Feldbauer via Tech-talk <tech-talk at aps.anl.gov>]

Hi Mark,

thanks for the info! I will check if we can use modbus!
We already have IOCs using the modbus device support here.

Cheers,
Florian

Am 18.09.2020 um 17:50 schrieb Mark Rivers:
> Hi Florian,
>
>
> Do you need to talk to it with Profinet?
>
> According to this discussion the Siemens ET 200SP can be used with Modbus TCP:
> https://support.industry.siemens.com/tf//WW/en/posts/modbus-tcp-with-simatic-et-200sp/115002?page=0&pageSize=10
>
> That means you should be able to talk to it with the EPICS modbus module:
> https://github.com/epics-modules/modbus
>
> Mark
>
>
>
>
>
> ________________________________
> From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Florian Feldbauer via Tech-talk <tech-talk at aps.anl.gov>
> Sent: Friday, September 18, 2020 10:26 AM
> To: tech-talk at aps.anl.gov
> Subject: Device Support for Siemens PLC with profinet
>
> Hey all,
>
> for our vacuum system, we have brought a Siemens ET 200SP with Profinet
> interface.
> Does anyone already have a device support for such a PLC?
>
> Best regards,
> Florian
>
> --
> Ruhr-Universität Bochum
> AG der Experimentalphysik I
> Dr. Florian Feldbauer
> NB 2/131 / Fach 125
> Universitätsstr. 150
> D-44801 Bochum
>
> Office: NB 2/134
> Phone:  (+49)234 / 32-23563
> Fax:    (+49)234 / 32-14170
> https://paluma.ruhr-uni-bochum.de
--
Ruhr-Universität Bochum
AG der Experimentalphysik I
Dr. Florian Feldbauer
NB 2/131 / Fach 125
Universitätsstr. 150
D-44801 Bochum

Office: NB 2/134
Phone:  (+49)234 / 32-23563
Fax:    (+49)234 / 32-14170
https://paluma.ruhr-uni-bochum.de