AW: Errors during installation of StreamDevice - V2

["Zimoch Dirk \(PSI\) via Tech-talk" <tech-talk at aps.anl.gov>]

You need to build asyn first before building StreamDevice. (And point to the correct path in your RELEASE file.)

Dirk

 

Von: Tech-talk <tech-talk-bounces at aps.anl.gov> Im Auftrag von Ewen Mallegol via Tech-talk
Gesendet: Dienstag, 18. Januar 2022 14:45
An: tech-talk at aps.anl.gov
Cc: ewen.mallegol1 at gmail.com
Betreff: TR: Errors during installation of StreamDevice - V2

 

Hello everyone,

 

I'm new to EPICS and i want to install StreamDevice but i encountered multiple errors.

I'm working on the iso files(RedHat) from the 2019 USPAS training on virtualbox.

 

At the architectural level I have to epics folder one from the epics-train and one just base-7.0.

When i download and make StreamDevice i have errors about "no such files or directory" so

I analyzed the other and copy/paste the missing files.

 

Now my last fatal error is about the library libasyn.a and particularly libstream.so ( you have the terminal window below).

 

[training@training StreamDevice]$ make
If you are not using the PSI build environment, GNUmakefile can be removed.
make -C ./configure install
make[1]: Entering directory `/home/training/base-7.0/tools/support/StreamDevice/configure'
make -C O.linux-x86_64 -f ../Makefile TOP=../.. \
    T_A=linux-x86_64 install
make[2]: Entering directory `/home/training/base-7.0/tools/support/StreamDevice/configure/O.linux-x86_64'
perl -CSD /home/training/base-7.0/src/tools/convertRelease.pl checkRelease
make[2]: Leaving directory `/home/training/base-7.0/tools/support/StreamDevice/configure/O.linux-x86_64'
make[1]: Leaving directory `/home/training/base-7.0/tools/support/StreamDevice/configure'
make -C ./src install
make[1]: Entering directory `/home/training/base-7.0/tools/support/StreamDevice/src'
make -C O.linux-x86_64 -f ../Makefile TOP=../.. \
    T_A=linux-x86_64 install
make[2]: Entering directory `/home/training/base-7.0/tools/support/StreamDevice/src/O.linux-x86_64'
make[2]: *** No rule to make target `../../lib/linux-x86_64/libasyn.a', needed by `libstream.so'.  Stop.
make[2]: Leaving directory `/home/training/base-7.0/tools/support/StreamDevice/src/O.linux-x86_64'
make[1]: *** [install.linux-x86_64] Error 2
make[1]: Leaving directory `/home/training/base-7.0/tools/support/StreamDevice/src'
make: *** [src.install] Error 2
[training@training StreamDevice]$

 

Thanks in advance for helping me

 

Ewen