Re: Potentiostat EPICS driver (EC301 / SP-300)

[Nilson Pereira via Tech-talk <tech-talk at aps.anl.gov>]

Hi Freddie,

thanks for pointing that out.

I will, for the moment, keep looking, but that could be one solution.

Thanks again.

Best,

Nilson


On 13.02.22 23:55, Freddie Akeroyd - STFC UKRI wrote:
> Hi,
>
> I am not able to recommend a potentiostat, but I did notice there are some python bindings for the SP300 that claim to work if run under Wine on Linux https://pyexplabsys.readthedocs.io/drivers/bio_logic.html#module-PyExpLabSys.drivers.bio_logic that might form the basis of some EPICS control, but I've not really used Wine myself so cannot say how easy or stable it all might be
>
> Regards,
>
> Freddie
>
> > -----Original Message-----
> > From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Nilson Pereira
> > via Tech-talk
> > Sent: 04 February 2022 17:54
> > To: tech-talk at aps.anl.gov
> > Subject: Potentiostat EPICS driver (EC301 / SP-300)
> >
> > Hello EPICS community,
> >
> > We are looking to get a new potentiostat and so far we are interested in these
> > two options:
> >
> > - Stanford Research EC301 - https://www.thinksrs.com/products/ec301.html
> >
> > - BioLogic SP-300 - https://www.biologic.net/products/sp-300/
> >
> > There seems to be an EPICS driver for the BioLogic SP-300, but it is windows
> > only (using the manufacter DLL -
> > https://github.com/ISISComputingGroup/EPICS-ECLab).
> >
> > Did anyone develope an ethernet/linux version of it?
> >
> > Does anyone have an EPICS driver for the Stanford Research EC301?
> >
> > Or is there a better, EPICS friendly, potentiostat from a difference brand that
> > you would recommend ?
> >
> > Thank you all for the great support.
> >
> > Nilson Pereira
> >
> >
> >
> > ________________________________
> >
> > Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
> >
> > Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher
> > Forschungszentren e.V.
> >
> > Aufsichtsrat: Vorsitzender Dr. Volkmar Dietz, stv. Vorsitzende Dr. Jutta Koch-
> > Unterseher
> > Geschäftsführung: Prof. Dr. Jan Lüning (Sprecher), Prof. Dr. Bernd Rech,
> > Thomas Frederking
> >
> > Sitz Berlin, AG Charlottenburg, 89 HRB 5583
> >
> > Postadresse:
> > Hahn-Meitner-Platz 1
> > 14109 Berlin
> > Deutschland
> This email and any attachments are intended solely for the use of the named recipients. If you are not the intended recipient you must not use, disclose, copy or distribute this email or any of its attachments and should notify the sender immediately and delete this email from your system. UK Research and Innovation (UKRI) has taken every reasonable precaution to minimise risk of this email or any attachments containing viruses or malware but the recipient should carry out its own virus and malware checks before opening the attachments. UKRI does not accept any liability for any losses or damages which the recipient may sustain due to presence of any viruses.

________________________________

Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.

Aufsichtsrat: Vorsitzender Dr. Volkmar Dietz, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Bernd Rech, Thomas Frederking

Sitz Berlin, AG Charlottenburg, 89 HRB 5583

Postadresse:
Hahn-Meitner-Platz 1
14109 Berlin
Deutschland