| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | ADSpinnakerConfig problem [SEC=OFFICIAL] |
| From: | "WYKES, Jeremy via Tech-talk" <tech-talk at aps.anl.gov> |
| To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
| Date: | Fri, 11 Mar 2022 06:20:11 +0000 |
|
Hi All,
We have been running a GigE FLIR Grasshopper camera at our beamline via ADSpinnaker without problems. I was curious to try a 'generic' GenICam-supporting camera with ADAravis, and got a Daheng Imaging Mercury 503-20GC-P. I can run the Daheng Mercury without
problem via an ADAravis IOC.
However, whenever I have the Daheng Mercury connected to the network, the ADSpinnaker IOC for the Grasshopper hangs at the ADSpinnakerConfig step during boot. With the Daheng Mercury connected, I can
still find the Grasshopper with arv-tool, connect to it via SpinView, and it works with an ADAravis IOC, so I suspect the connection problem might be specific to ADSpinnaker.
Has anyone else experienced such issues, or have any suggestions for where to go next with troubleshooting?
Thanks
--
Jeremy Wykes
Scientist - MEX
ANSTO Australian Synchrotron
|