Re: ADSpinnakerConfig problem [SEC=OFFICIAL]

[Mark Rivers via Tech-talk <tech-talk at aps.anl.gov>]

That is strange. ADSpinnaker works fine with Allied Vision cameras on the network, for example.

For troubleshooting I suggest adding debug printf calls in the constructor.

Mark

Sent from my iPhone

On Mar 10, 2022, at 8:20 PM, WYKES, Jeremy via Tech-talk <tech-talk at aps.anl.gov> wrote:



Hi All,

We have been running a GigE FLIR Grasshopper camera at our beamline via ADSpinnaker without problems. I was curious to try a 'generic' GenICam-supporting camera with ADAravis, and got a Daheng Imaging Mercury 503-20GC-P. I can run the Daheng Mercury without problem via an ADAravis IOC.

However, whenever I have the Daheng Mercury connected to the network, the ADSpinnaker IOC for the Grasshopper hangs at the ADSpinnakerConfig step during boot. With the Daheng Mercury connected, I can still find the Grasshopper with arv-tool, connect to it via SpinView, and it works with an ADAravis IOC, so I suspect the connection problem might be specific to ADSpinnaker. 

Has anyone else experienced such issues, or have any suggestions for where to go next with troubleshooting?

Thanks

--

Jeremy Wykes

Scientist - MEX

ANSTO Australian Synchrotron