RE: Stream device IOC does not exit under procServ

[Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov>]

Hi Mark

 

It is connected via Ethernet and configured as

 

drvAsynIPPortConfigure(“HVPS”, “ip-address:7000”, 0, 0, 0)

 

Best Regards,

Abdalla.

 

From: Mark Rivers [mailto:rivers at cars.uchicago.edu]
Sent: Thursday, March 10, 2022 10:59 PM
To: Abdalla Ahmad <Abdalla.Ahmad at sesame.org.jo>
Cc: tech-talk at aps.anl.gov
Subject: Re: Stream device IOC does not exit under procServ

 

What is the physical interface to the HVPS, serial, Ethernet, etc?

Sent from my iPhone

On Mar 10, 2022, at 12:33 AM, Abdalla Ahmad <Abdalla.Ahmad at sesame.org.jo> wrote:



Hi Mark

 

The HVPS is controlled via stream device, I attached the protocol file and the template database.

 

Best Regards,

Abdalla.

 

From: Mark Rivers [mailto:rivers at cars.uchicago.edu]
Sent: Wednesday, March 9, 2022 8:17 PM
To: Abdalla Ahmad <Abdalla.Ahmad at sesame.org.jo>
Cc: tech-talk at aps.anl.gov
Subject: Re: Stream device IOC does not exit under procServ

 

Hi Abdullah,

 

Is the code for the HVPS available on GitHub or somewhere else we can see it? We might be able to spot the problem.

 

Mark

 

 

Sent from my iPhone

On Mar 9, 2022, at 12:00 AM, Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov> wrote:



Hi

 

We have an IOC to control two types of devices using stream device, a high-voltage PS from matsusada and a current pre-amplifier from SRS. The problem is that when typing exit on the IOC shell the IOC does not exit, so I tried excluding devices from the IOC and it seems the problem is with the HVPS, when excluded from the IOC it exits normally and restarts under procServ. I enabled asyn masks using asynTraceMask and asyntraceIOMask, even after the exit the IOC is doing IO with the device with no problem. I was using asyn 4.30 and stream 2.8.16 I think so I pulled the latest version of all drivers and still the same behavior.

 

Best Regards,

Abdalla.