RE: EPICS mrfioc2 and new mtca card EVRTM-300

[GAGET Alexis via Tech-talk <tech-talk at aps.anl.gov>]

Hi,

Thanks

You're right I have forked from https://github.com/icshwi/mrfioc2 some years ago from ICS ESS and themselves forked from Michael. But both don't seems to have evolved so much lately.

GitHub - icshwi/mrfioc2: EPICS driver for Micro Research Finland event timing system devices github.com EPICS driver for Micro Research Finland event timing system devices - GitHub - icshwi/mrfioc2: EPICS driver for Micro Research Finland event timing system devices

---

De : Han Lee <jeonglee at lbl.gov>
Envoyé : vendredi 30 septembre 2022 18:30:14
À : GAGET Alexis; Jerzy Jamroz; Timo Korhonen
Cc : tech-talk at aps.anl.gov
Objet : Re: EPICS mrfioc2 and new mtca card EVRTM-300

 

Hi Alexis,

There are some variants of mrfioc2 in our community. Please confirm your mrfioc2 is the community mrfioc2 or other variants.

I am sure the ESS team will answer your questions precisely because ESS drove MTCA MRF products. Jerzy will help you with the technical implementation @Jerzy Jamroz, and Timo will help you with its design and architecture @Timo Korhonen 

.

They may have yet another variant, mrfioc2, which has not yet merged into the community one.

It looks like now, finally, the RTM unit is available on the market and the MRF products are ready for the MTCA as a complete set.

Best,

Han

On Fri, Sep 30, 2022 at 9:20 AM GAGET Alexis via Tech-talk <tech-talk at aps.anl.gov> wrote:

Dear MRF driver experts,

 

I am doing some test with the quite new card (1 year), mTCA-EVRTM-300. For those who don’t know it this is an universal output extender for the MTCA-EVR-300 or even apparently for the MTCA-EVM-300.

First, is someone tried and managed to use the card with the mrfioc2 driver ?

 

For now I’m just testing it with the EVR and I have some problem.

 

My issue :

I have added a substitutions files with  only:

 

file "mrmevrout.db"

{pattern

{ON, ONSRC, OBJ, DESC}

{"$(SYS)-$(D):OutRB0-", "$(SYS)-$(D):OutRB0-Src-", "$(EVR):RearUniv0", "Rear 0"}

{"$(SYS)-$(D):OutRB1-", "$(SYS)-$(D):OutRB1-Src-", "$(EVR):RearUniv1", "Rear 1"}

{"$(SYS)-$(D):OutRB2-", "$(SYS)-$(D):OutRB2-Src-", "$(EVR):RearUniv2", "Rear 2"}

Etc …

 

My startup file

 

mrmEvrSetupPCI("EVR-MTCA5", "$(EVR_PCI5)")

and

dbLoadRecords("evr-mtca-300u.db","SYS=$(SYS),D=$(EVR), EVR=EVR-MTCA5 , PINITSEQ=$(EVR),FRF=$(FREQ),FEVT=$(FREQ)")

dbLoadRecords("evr-mtca-rtm-300.db","SYS=$(SYS),D=$(EVR), EVR=EVR-MTCA5 ")

 

The evr-mtca-300u works well, but for the rearUniv I have the following messages :

 

LABO-MPS-SBCT:TIM-EVR-1:OutRB0-Ena-SP: failed to find/create object 'EVR-MTCA5:RearUniv0' : Object not found : EVR-MTCA5:RearUniv0

LABO-MPS-SBCT:TIM-EVR-1:OutRB1-Ena-SP: failed to find/create object 'EVR-MTCA5:RearUniv1' : Object not found : EVR-MTCA5:RearUniv1

 

I have checked the register and Jukka confirmed me that we have to use the TBOutput register and RearUniv in the driver seem to correspond.

 

Have I missed something ?

 

Thanks in advance

Alexis GAGET

CEA Saclay - DRF/Irfu/DIS/LDISC

Bâtiment 472 - pièce 105

alexis.gaget at cea.fr

01 69 08 95 17

 

--

Jeong Han Lee, Dr.rer.nat

Staff Scientist and Engineer

Lawrence Berkeley National Laboratory

1 Cyclotron Road Mailstop 46R0161

Berkeley, CA 94720, United States

Tel :+1-510-486-6163

Cell:+1-510-384-3868