1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Illegal field value PV: oms:m1 motor_init_record_com(): card does not exist! motorOMS st.cmd error |
From: | Kevin Peterson via Tech-talk <tech-talk at aps.anl.gov> |
To: | Mark Rivers <rivers at cars.uchicago.edu>, whitetiger1123 <holyeongbaeg at gmail.com> |
Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Mon, 28 Nov 2022 10:50:59 -0600 |
Kevin On 11/24/22 12:45, Mark Rivers via Tech-talk wrote:
Hi,Are you sure you have correctly set the jumpers on the board for A16 address space and address 0xF000?You also need to set the address mode to something like “supervisory data” but I forget the exact setting and I don’t have access to our annotated manual today.Mark Sent from my iPhone
Attachment:
MAXv_F000_jumpers.png
Description: PNG image